How do I identify my Toyota axle?
You will also need to check the first few digits of you VIN #. The first position of the Axle Code is a letter which identifies the diameter of the ring gear. Toyota trucks and 4Runners have always used the 7.5″ and 8″ diameters, but the others are listed here for completeness.
What is L3 axle code?
L3 — 3.31 locking differential. L4 — 4.10 locking differential. L5 — 3.15 locking differential. L6 — 3.73 locking differential.
Which differential do I have?
Differential Identification using Tags & Stampings The most accurate differential identification is provided by the bottom line of the tag number or axle tube stamp. Differential tags can easily be used to identify Dana and Ford differentials.
Do axles have VIN numbers?
The most common places to find the VIN number on a trailer is on the tongue, near the axles, front left of the sidewall, or near the hitch.
What is a 27 axle code?
Ford axle code 27 means your truck has a 3.31 non-limited slip differential.
How do I identify a Dexter axle?
Close to the sticker there’s a number stamped in the axle with a axle weight rating. That’s what Dexter uses for identification. And also it is a stamped 9 digit number, about 18 inches inside the curb side of the axle on the rear side of the axle, underneath the words “DEXTER AXLE”.
How do I know what gear ratio My rear end is?
Turn the wheel TWO revolutions and count the number of driveshaft turns. The number of driveshaft rotations will help you determine your rear axle ratio. For example, if it turned 3 and a half times, it’s a 3.50:1 ratio. If it turned 4 and a quarter times, it’s a 4.25:1 ratio.
What is the gear code on a Toyota g292?
The gear code is circle in red and is G292, which indicates an 8″ rear diff with 4.10 gears and a 2 pinion carrier. Above is a typcial earlier model Toyota VIN plate, located on the engine compartment fire wall.
What does g282 mean on a Toyota 4Runner?
For example, my Japanese truck’s code is G282. This means I have an 8-inch (rear) axle, 4.30 gears (which is common with automatic transmissions), and a 2-pinion design (common in 4 cylinders). The highlighted cells in the first table are the values you are most likely to find in Toyota 4Runners and Pickup Trucks.
What does the gear code on a g662 mean?
The gear code is circled in white and is G662, indicating 3.07 gears and an 8″ diff and 2 pinion open carrier, which is surprising considering that many 4×2 trucks came with 7.5″ rear diffs. But some did come with 8″ diffs.