How much is a 2 ton overhead crane?
Get 2 Ton Overhead Crane Price From Aicrane!…AQ-LD 2 Ton Overhead Crane for Sale.
Model | AQ-LD |
---|---|
Load capacity | 2 ton |
Span | 7.5-31.5m |
Lifting height | 6-30m |
Lifting speed | 0.3-8m/min |
What is overhead crane span?
An overhead crane’s span is essentially its width across the bay—or the measured center-to-center distance between the runway beams. It’s important because it determines how much material is required to build the bridge girders and most significantly affects the cost of the overhead crane.
How much does a 10 ton bridge crane cost?
Jib Crane: Anywhere from $500 – $25,000 Structural (can be designed up to 10-ton capacity)
What is a crane runway?
Top Running Crane Runway Generally, this runway style typically uses ASCE Rail or square bar that is affixed to the top of a structural beam as a running surface for the top running crane.
What is a crane runway beam?
The crane runway beam section of overhead cranes can consist of a rolled I-section, either with or without side reinforcements for supporting horizontal loads, an I-section that has been welded together or a box girder. The same type of sections can be used for suspended cranes, however without a rail.
What is crane hook height?
The hook height represents the required dimensions from the crane hook to the floor when the crane hook is at its highest position. This vital measurement determines how high the runway must be from the floor and directly related to the clear interior height of the building or structure.
How much does it cost to put up a crane?
The typical fee for installation and disassembly runs around $60,000. This price includes shipping the crane to the site, renting the mobile crane used to assemble the tower crane, the cost of the crew that handles the assembly, etc.
What is the overhead crane runway?
What is a bridge crane runway? The runway system of an overhead crane can include the beams, columns, and rails that the crane runs along. The bridge or girder end trucks run along a rail which is secured to the top of the runway beams.
What is minimum width of passageway requirements on overhead travelling crane?
(a) Passage-way shall be provided along and adjacent to every rail-track of every over-head travelling crane of such width that there is a clear space of not less than 50 cm between crane operating on the track and Page 2 Doc. No: SC/14, Rev no: 00 Page 2 of 18 any column, fixture or fixed structure, so that no person …
What is a crane girder?
A crane girder is a preformed metal beam on which the crab or hoist head of a traveling overhead crane runs. Such girders are typically “I” profile beams that may be reinforced at various points depending on the loads and crane configuration involved.
What is an EOT crane meaning?
Electric Overhead Travelling Crane
EOT Crane : Electric Overhead Travelling Crane. Capacity : the rated capacity or the max load which this crane can handle or is designed to handle. Height of lift : the distance of upper most to lowermost position which the crane can travel.
What is the span of a bridge crane?
The span of a bridge crane refers to the distance between the center lines of the wheels at both ends of the main beam of the crane, that is, the distance between the center lines of the cart tracks, in meters (m). Overhead crane spans can be 10.5m, 13.5m, 16.5m, 19.5m, 22.5m, 25.5m, 28.5m, 31.5m and many others.
What are the different grades of bridge cranes?
Bridge cranes can be divided into three grades according to the lifting weight: 5~10t small overhead crane, 10~50t medium overhead crane, and more than 50t heavy duty overhead crane.
What is the lifting capacity of overhead crane?
The lifting capacity of the overhead crane can be 5t, 10t (single hook), 15t/3t, 20t/5t, 30t/5t, 50t/10t, 75t/20t, 100t/20t, 125t/20t, 150t/30t, 200t/30t, 250t/30t (double hook) and many others. The numerator in the number is the primary hook weight, and the denominator is the secondary hook weight.
What are the main technical parameters of the overhead crane?
The main technical parameters of the overhead crane are lifting capacity, span, lifting height, running speed, lifting speed, working duty, etc. Lifting capacity, also known as rated lifting capacity, refers to the maximum allowable lifting load of the crane, in tons (t).