What is a Swager machine?
Swaging machines, also known as swagers, are a low-cost way to efficiently point, reduce and form rod, tube or wire. Based on a simple principle, it is the process of shaping metal (forging) by means of a series of very rapid blows delivered by rotating hammers and forming dies around a piece of work.
What is swaging operation?
Swaging, also pronounced “swedge”, is a metal-forming technique in which the metal of one part is deformed to fit around another part by either pressing or hammering, or by forcing the material through a die.
What is a swaging unit?
The multihead hydraulic swaging unit (MHSU) reduces assembly and installation time of Swagelok tube fittings by preswaging the ferrules onto tubing. A standard tube marking feature indicates when the tube is properly bottomed in the unit.
What is a swaged end fitting?
Swaging is a method of securing cable railing wire with a permanently fitted cable or sleeve. The connection typically exceeds the rated breaking strength of the wire rope or cable. This is accomplished using fittings known as swages. By definition, a swage fitting is a wire rope component.
What is swage in piping?
Swage Pipe Nipple Swage nipples are used to bring the flow of fluids from one pipe size to another pipe size. You can find swage nipples that are plain, beveled or with threaded ends. The function of swage nipple is to change pipe’s diameter and to connect two pipes of different sizes.
What is a swaged tube?
Tube Swaging is a fabrication process where a tube or pipe end is forced through a die or series of dies with hydraulics to increase or decrease the OD (Outside Diameter) of the tubing or pipe. This Process is a “cold” without the use of heat.
What are the two types of swaging tools?
There are two basic types of rotary swaging machine, the standard (also known as a tagging machine), and the butt swaging machine. A butt swaging machine works by having sets of wedges that close the dies onto the workpiece by inserting them between the annular rollers and the dies, normally by the use of a foot pedal.
What is swaging in metal?
Swaging is a method used to move the shape of metal through cold forming. This process ‘moves’ not removes metal, so essentially it’s a scrap-less forming process. Swaging is a manufacturing process that uses a tool called a swager, for cold shaping metal into the required shape.
What is swaging in refrigeration?
Swaging is the process of joining two pieces of copper tubing of the same diameter by expanding or stretching the end of one piece to fit over the other so that joint may be soldered or brazed. As a general rule, the length of the joint that fits over the other is equal to the approximate outer diameter of the tubing.
What is sweating in HVAC?
Air conditioner sweating occurs when humid air in the home makes contact with the cold surface of the ducted air conditioner grille. Sweating is likely to occur when the air temperature is below the dew point temperature.
What are the advantages of a swaging press?
You do NOT have to buy the additional parts built into every single reloading press die, since you pay for them just one time when you buy the swage press. This makes the press much faster to use, but also reduces the price of each die compared to a reloading press swage die.
What is a swaged hose?
“Swaging is pushing a hose and fitting through a fixed set of dies changing the form of the fitting onto the hose and creating a smaller diameter. Crimping a fitting onto a hose is different in that the dies are not fixed and usually come in segments (usually eight).