What is a balloon in engineering?
A balloon is a graphic that identifies a part or assembly component and associates it with a label. Only the parts that have a corresponding entry in a parts list can be ballooned.
How do you make balloons in Creo?
To add a reference balloon,
- Set the drawing filter to “component.”
- Click the part to which to add the balloon. (You can also select from the model tree.)
- On the Table tab click Create Ref Balloons. Alternatively, right-click, and click Create Ref Balloons on the shortcut menu. The reference balloon is added to the part.
What are balloons in drawings?
What is a ballooned or itemized drawing? A ballooned drawing contains numbered “balloons” that point to individual dimensions and requirements of the part. The numbers on the ballooned drawing correlate with the numbers found on the Dimensional Data Sheet or Report (e.g. AS9102 Form 3).
How do you move balloons in Creo?
- Select the balloon to change.
- Right-click and click Edit Attachment on the shortcut menu.
- Specify an attachment location and a leader style to the balloon. For example, to change an arrowhead pointing to an edge to a clear dot attached to a surface, a.
- Click Done/Return to complete. •
What are the three different types of BOM balloons?
Balloons that show only one report symbol (usually the index number) are called Simple balloons. Balloons that are split to show the index number in the upper half and the quantity of the part in the lower half of the circle are called With Quantity balloons. There is a third type of balloon called the Custom Balloon.
What is a balloon in Solidworks?
The balloons label the parts in the assembly and relate them to item numbers on the bill of materials (BOM).
How do you make a balloon note?
The NOTE TYPES menu appears in the Menu Manager.
- Click the required commands on the NOTE TYPES menu and click Make Note.
- Select the leader type, if necessary.
- Select an entity, surface, or a free point as the attachment location for the balloon.
- Middle-click to select the point where you want to place the balloon note.
How do you change a balloon?
Change the balloon type Right-click, and then select Edit Balloon. In the Edit Balloon dialog box, select the Override Shape (by Style) checkbox. Select a different balloon type from the standard balloons or click Used-Defined Symbol, and select a sketch symbol from the list.
How do you draw a balloon in Solidworks?
To insert balloons:
- Click Balloon (Annotation toolbar), or click Insert > Annotations > Balloon.
- Edit the properties in the PropertyManager as needed, then click a component in a drawing view of an assembly, or click a component in an assembly model, to place the leader, then click again to place the balloon.
How do you add a balloon to a drawing?
Right-click a balloon in the drawing and select Attach Balloon From List. In the Attach Balloon dialog box, click the arrow on the Filter list and select the parts to display in the list. In the table, select parts for which you want to create and attach a balloon.
How do I edit a balloon in Solidworks?
To edit balloon text, do one of the following:
- Double-click the balloon text and edit in place.
- Select the balloon and edit the text in the PropertyManager.
- Right-click the balloon and click Properties.
Are balloons reversible?
Inflating a balloon is a reversible change. When air is blown into a balloon, its shape and size change and the balloon gets inflated. Now when the air filled in the balloon is allowed to escape, the balloon comes back to its original size and shape. Hence, inflating a balloon is a reversible change.
What is BOM and BOQ?
Bill of Materials (BOM) and Bill of Quantities (BOQ) are two important parts of the planning process.
Does BOM cost labor?
What is Bill of Materials? Bill of Materials (BOM), or structure, is a list of all the parts needed to build the end product. Parts include discrete components, sub-assemblies, raw materials, firmware and labor.
How do you draw an engineering balloon?
General rules for balloons
- The balloon type must be the same across all drawings corresponding to a single reference drawing.
- Balloons should not overlap the parts list area or title block area.
- The leader length should be significantly larger than the balloon text height.
What are balloons solidworks?
The balloons label the parts in the assembly and relate them to item numbers on the bill of materials (BOM). Contents. Balloons Overview.