How do I reset my RadioRA 2 main repeater?
RadioRA 2 Main Repeater (IMPORTANT: refer to Best Practices before proceeding!) Step 1: Quickly triple tap and hold down any button on the Main Repeater. DO NOT release after the third tap. Step 2: Continue to hold the button for a few seconds.
How do I program my RadioRA 2?
To set up a RadioRA® 2 system, components must be added to the Main Repeater. First, add Auxiliary Repeater(s)*; then add all other system devices. Press and hold the Add button on the Main Repeater for 3 seconds until the green Add LED begins to rapid-flash (ten times per second) and the Repeater beeps.
What is the maximum specified RF range from a main repeater to an auxiliary repeater?
30 ft
For systems that extend up to 30 ft (9 m), one (1) Main Repeater is required to set up the system. Up to four (4) Auxiliary Repeaters can be added to extend the RF range for larger system applications. Each Repeater has an RF range of 30 ft (9 m), covering a total area of approximately 2500 ft2 (232 m2).
How do I connect my Lutron to a new WIFI?
- Make sure your Smart Bridge is connected to the new router.
- Connect the ethernet cable from the bridge directly to a LAN port on the new router.
- Re-set your router by cycling power off for 10 seconds and then turn it back on.
- Re-set your Smart Bridge by cycling power off for 10 seconds and then turn it back on.
How do I reset my Lutron account?
Go to https://device-login.lutron.com and sign in to your account. Then you will be able to change your account info. Originally Posted by Kevin P.
Can I install RA2 select myself?
The short answer is yes, RA2 SELECT is meant to be a customer programmed system. You can do the electrical part yourself too if you know how; however, much as it is with Caseta, a lot of customers hire an electrician to install the devices and they’ll do the programming themselves.
What software is used to program a RA2 select system?
RA2 Select main repeater and the Lutron App The RA2 Select main repeater allows for setup, control, integration and monitoring of in-line dimmers and switches, Pico scene keypads, and wireless blinds from a smartphone or tablet using the Lutron App.
How do I connect my Lutron Connect bridge?
Go to activate > processor and connect bridge to begin. Initially, no Lutron Connect Bridge will be discovered. The button on the Lutron Connect Bridge must be pressed in order to place the device into discovery mode. Click on Start Activation to re-discover the device.
What does a Lutron repeater do?
The Lutron wireless repeaters allow for the wireless range expansion of your Lutron lighting control system for whole house coverage. Lutron wireless repeaters extend the range of Radio Frequency (RF) signals that are sent between devices.
How do I reset my Lutron?
How do I factory reset my Lutron Caseta switch? Rapidly tap the top “on” button three times and on the third tap hold until the lights connected to the switch begin to dim up and down, immediately tap the top “on” button three times rapidly. The connected lights will then alternate dim and bright slowly.
How do I find my Lutron IP address?
The Lutron App will walk you through the initial system setup and adding devices. The integration report and IP address settings are found in the Settings ->Advanced menu of the app. Tap the icon in upper left corner to access the Settings menu. Reference instructions for more details.
How do I connect my Lutron to a new wi fi?
Tap on the Lutron Connect app in the search results. Tap on the Install button and then choose to Accept the access request. The Lutron Connect app will then begin to download onto the device. Make sure that the mobile device is connected to the local Wi-Fi network that the Lutron Connect Bridge resides on.
What is the difference between RA2 and RA2 select?
The other major difference between RadioRA2 and RA2 select is how you program it. With RadioRA2 you must use the Essentials (or Inclusive) software that runs on a PC to setup and program your Lutron system. With RA2 Select, you use a mobile app — the same app used for Caséta.
Is Lutron RA2 DIY?
How do I connect my Lutron hub?
Caséta Support
- Determine where to install your Smart Bridge.
- Connect the bridge to the router.
- Bridge Initialization.
- Verify the Wi-Fi Connection on all of your connected Smart Devices.
- Download the Lutron App from the App Store.
- Bridge Discovery & Pairing.
- Final Set-up.
How do I find the IP address of my Lutron bridge?
The button on the Lutron Connect Bridge must be pressed in order to place the device into discovery mode. Click on Start Activation to re-discover the device. The Lutron Connect Bridge will be discovered and its current IP address and MAC address will be displayed on the left-side of the screen.
Can’t connect to Lutron bridge?
All Users: If you are still unable to connect, we recommend that you reset your router by disconnecting the power for 10 seconds. This will restart the bridge. If the Lutron App is still unable to find the bridge, this is most likely because the Bridge and your smart device are not connected to the same network.
Do Caseta switches act as repeaters?
With the Caseta Smart Wireless Repeater by Lutron, you can now extend the range of your Caseta system up to 60 feet. Use the included power adapter to plug the repeater into an outlet within 60 feet of your Caseta smart bridge in room where coverage can be problematic – no extra ethernet connection required.