How do you troubleshoot a Beko washing machine?
If your washing machine doesn’t start, hold the start, pause and cancel buttons down for about three to four seconds. This should reset the machine and allow you to continue. If it does not work you may have to call out an engineer.
How do I reset my Beko 8kg washing machine?
If your Beko washing machine won’t start, there’s an easy reset process to follow:
- Locate the start, pause and cancel buttons.
- Press them all down at the same time for around 3-5 seconds.
- Your machine should now be reset.
Why is my washing machine not draining properly?
Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed. Whatever the reason, the water will need to be drained from the washing machine before any work or diagnosis can be done.
Where is reset button on Beko washing machine?
Try resetting the appliance by pressing and holding the start/pause/cancel button for three seconds.
Why are my clothes still soaked after spin cycle?
Drain Hose Issues The most likely culprit for a washer that spins but still turns out soaked clothing is a drain hose problem. It could be clogged, kinked, or even positioned incorrectly if you had to remove the drain tube to make another repair already.
Why are my clothes so wet after washing?
Loading Too Many Items If the washer leaves clothes soaked after a large load, remove some items, redistribute others and run another rinse and spin cycle. This will create a more balanced load and enable proper spin cycle speed. Avoid overloading by only filling the washer ¾ of the way full with each wash load.
What do I do if my washing machine isn’t draining?
What to Do When Your Washing Machine Won’t Drain
- Perform a Master Reset. Unplug your washer for about one minute.
- Test the Lid Switch Assembly.
- See if the Drain Hose is Kinked.
- Check the Drain Hose or Pump for Clogs.
- Clean out the Coin Trap.
- Check the Water Level Control.
- Schedule Washing Machine Repair.
How do you clear the fault code on a Beko washing machine?
The Beko error code system is very simple it goes from E1 to E18, if you can correct the error yourself then you’ll simply need to hold down the start button to clear the error code.
Is there a reset button on a Beko washing machine?