How do I connect my Brother HL 3170CDW printer to my WIFI?
Connect the power cord to your Brother machine and then connect it to an AC power outlet (electrical socket). Turn your Brother machine on….Press the Up or Down arrow key to select the following:
- Select Network. Press OK.
- Select WLAN. Press OK.
- Select Setup Wizard. Press OK.
How do I get my Brother printer to print double sided?
Print on both sides of the page. (Manual 2-sided/Duplex Printing)
- Open the printer driver.
- Choose the BASIC tab.
- Check REVERSE ORDER.
- Choose the ADVANCED tab.
- Click OTHER PRINT OPTIONS.
- Choose PRINT ORDER.
- Check PRINT ODD PAGES.
- Click OK. – Your Brother machine will print all of the odd-numbered pages.
How do you reset the drum on a Brother HL 3170CDW?
Brother HL-3170CDW – Reset Drum
- Press the Up arrow key while holding down “Go” on the printer’s control panel.
- Press the Up or Down arrow key to display Drum Unit.
- Press the Up or Down arrow key to display the colour of the drum unit that you replaced.
- Press the Up arrow key for “Reset” to reset the drum counter.
Can Brother laser printer print on cardstock?
Keep the paper flat and away from moisture, direct sunlight, and heat. – Cardstock paper that is 43 lb of less is supported. If Cardstock paper is over 43 lb, it is not supported on the machine.
Why My Brother printer Cannot print double-sided?
Open the Properties dialog box in the printer driver. Select Duplex Printing mode in the Advanced tab, make sure that ‘Use Duplex Unit’ has been selected, and then click the OK button. The printer will print on both sides of the paper automatically. Change the Pages per sheet setting in Layout.
Can I use thick paper in my Brother printer?
You can use the following types of print media: plain paper, thin paper,thick paper, thicker paper, bond paper, recycled paper, labels, envelopes or glossy paper.
How thick paper can a Brother printer handle?
Paper Tray
| Paper Type | Weight | Thickness |
|---|---|---|
| Inkjet Paper | 17 to 53 lb (64 to 200 g/m2) | 3 to 10 mil (0.08 to 0.25 mm) |
| Glossy Paper*2 | Up to 58 lb (Up to 220 g/m*2) | Up to 10 mil (Up to 0.25 mm) |
| Photo Card*2 | Up to 58 lb (Up to 220 g/m2) | Up to 10 mil (Up to 0.25 mm) |
| Index Card | Up to 32 lb (Up to 120 g/m2) | Up to 6 mil (Up to 0.15 mm) |
How do I connect my Brother printer to my computer without WiFi?
You can connect the printer to a computer with a USB cable and a network using the wireless connection or an Ethernet cable.
How do I connect my Brother printer to my computer without cable?
To connect the printer and your computer:
- Connect your computer to your wireless router/access point. (You can skip this step if your computer is already connected to a Wi-Fi® network.)
- Connect your Brother printer to the same wireless router/access point.
- Connect your Brother printer and your computer.