Is Styrofoam and EPS the same?
The foam that you formerly knew as styrofoam is actually expanded polystyrene foam or EPS. This material is made from polystyrene, a plastic that’s often used to make clear products like food packaging or lab equipment.
Is EPS safe?
EPS is non-toxic, chemically inert, non-irritant and odourless making it entirely safe to use across all construction applications.
Does EPS foam shrink?
However, EPS also experiences post- molding shrinkage; it shrinks dimensionally from its molded size after processing. This means parts must be stored in warehouses until they are considered stable by the industry standard, DIN EN 1603. This often takes 11-18 weeks and is thus very timely and expensive.
Which foam insulation is best?
Closed cell foam is the best choice for robust insulating where space is an issue, as it can achieve 2x the R-Value of open cell inside a standard wall. Its rigid nature also adds to the structural integrity of the building and E84 fire rated versions are available.
Is EPS better than XPS?
XPS, at about R-5 per 25 mm, has only a slightly better thermal performance than EPS. The thermal insulation performance of EPS and XPS in identical densities is quite close. However, EPS with the same level of density is less expensive.
Is EPS good insulation?
EPS is an extremely durable material Expanded polystyrene will last the lifetime of any building where it’s installed. The thermal performance of EPS does not degrade over time, meaning the U-value you first achieve with EPS will not change.
Is EPS foam waterproof?
While polyiso, XPS and EPS have some of the strongest waterproofing properties of all insulations, EPS is the weakest of the three and absorbs more water. EPS is also susceptible to crumbling on the edges.
Does EPS foam degrade?
EPS foam is expanded using steam. It is the entrained air that provide the insulation value in the material. EPS is a plastic and aside from contact with hydrocarbons or exposure to UV from sunlight, it is relatively unaffected by other naturally degrading processes.
Is EPS waterproof?
EPS is resistant to water and moisture. This means that it does not absorb them and that its insulating performance is not compromised when in contact with these elements. Insulation boards made of expanded polystyrene can make a home healthier because they will not contribute to mildew formation.
Can EPS foam get wet?
Which foam board has the highest R-value?
Polyisocyanurate
Polyisocyanurate: Known as polyiso for short, polyisocyanurate foam has the highest R-value per inch (R-6.5 to R-6.8) of any rigid insulation.