Which way do you turn a barrel adjuster?
To do this, turn the barrel adjuster (see below) counter clockwise. If the chain is not shifting well from the largest to the smallest chainring, then the inner wire tension needs to be lowered. To do this, turn the barrel adjuster clockwise.
How does Campagnolo shifter work?
How to use Campagnolo road bike shifters. Campagnolo shifters are slightly different again – a shift lever behind the brake lever shifts into a larger cog/chainring on both the front and rear, while a thumb-operated paddle on the inside of the hood shifts into a smaller cog/chainring.
Do you need a Campagnolo chain tool?
Campagnolo tell you to use only their own chain tool, called the UT-CN300, warning that ‘use of another tool could result in failure of the chain, an accident, personal injuries or death.
Which way do you turn a barrel adjuster for rear derailleur?
This rule will help you remember which way to turn it: If the derailleur is hesitating when shifting toward the spokes (the more common problem), turn the barrel toward the spokes (counter-clockwise); and if it hesitates shifting away from the spokes, turn the adjuster away (clockwise) from the spokes.
Does Campagnolo have electronic shifting?
As many of you know, Campagnolo recently formally introduced its electronic shifting system, dubbed EPS, to the market. Campagnolo has been working on this electronic system for over 20 years, so there has been some anticipation regarding its final release.
Are Campagnolo chains directional?
While some bike chains are directional, most aren’t. For instance, Shimano chains tend to be directional while SRAM, KMC, Campagnolo chains are non-directional. Directional components usually have logos facing outwards on one of the side plates.
How do I charge my Campagnolo Super Record EPS?
Connect the 6-pole female connector on the battery charger output cable to the connector on the EPS power system. 2) on while the battery is being charged; once the battery is fully charged, this LED turns off.
How does B-tension affect shifting?
So what does happen when the B-Tension adjustment is too far away from the cog? Essentially, it just slows down your shifting. It will still work, but as the derailleur pushes on the chain from the inside, the shift takes place when the chain picks up the tooth on the next cog.