How do I factory reset my Xerox workcentre 5330?

How do I factory reset my Xerox workcentre 5330?

From the powered on state, hold down the “0” button for six seconds and then press the “Start” button while still holding the “0” button. The machine will prompt you for a password. Enter the default access number “6789” and press “Confirm.” The display will acknowledge that you are now in diagnostic mode.

How do I factory reset my Xerox workcentre 7845?

Perform a Software Reset

  1. Press the Log In/Out button on the Control Panel.
  2. Login as the device Administrator (Default Username: admin, Default Password: 1111).
  3. Press the [Machine Status] button on the Control Panel.
  4. Select the [Tools] tab on Touch Screen.
  5. Select the [Troubleshooting] button.
  6. Select the [Resets] button.

What is the default password for Xerox Workcentre?

1111
Enter the password in the field provided. NOTE: The default user ID is “admin” (case sensitive). The default passcode is “1111”.

What is the default admin password for Xerox printers?

NOTE: The default user ID is “admin” (case sensitive). The default passcode is “1111”.

How do I factory reset my Xerox workcentre 3025?

Reset the Printer to Factory Defaults

  1. Log in to the control panel as a System Administrator.
  2. Press the Home button.
  3. Touch Device > Resets.
  4. To reset the printer to factory defaults, touch Reset to Factory Defaults.
  5. At the confirmation message, touch Reset.

How do I factory reset my Xerox workcentre 7535?

Dear AllKindly find my solution.

  1. enter diagnostic mode >> hold 0 10s then press start >> password 6789.
  2. tab on Adjustments then tab on dc301 NVM initialization >> choose copier >> selest all >> then initialize.
  3. tab on call closeout then exit & reboot.

How do I factory reset my Xerox workcentre 3345?

To restore your printer to factory default settings, perform the following steps:

  1. In Xerox® CentreWare® Internet Services, click Status→General.
  2. To restore the original network default settings, click Network Factory Default.
  3. To confirm, click OK.

What happens when you factory reset your printer?

Restoring the factory-set defaults returns most of the settings to the factory defaults. It will not reset the page count, tray size, or language. To restore the product to the factory-default settings, follow these steps.

How do I log into my Xerox printer as an administrator?

Access the Printer as a System Administrator

  1. At the printer control panel, press the Log In button.
  2. Touch or type admin.
  3. Type the administrator password, then touch OK. Note: Depending on when the device was manufactured, the default password may be the device serial number or 1111.

How do I reset the admin password on a Xerox workcentre 3335?

Re: Reset admin password on Xerox WorkCenter 3335

  1. At the printer control panel, press the Machine Status button.
  2. Enter the system administrator user name.
  3. Enter the default administrator password and select OK.
  4. A Change Admin Password screen displays prompting you to change the default password.

What is the default username and password for Xerox Workcentre?

Enter the password in the field provided. NOTE: The default user ID is “admin” (case sensitive). The default passcode is “1111”.

How do I reset my Xerox workcentre 3215?