How strong is bondek?
BONDEK PLUS® comes in a variety of thicknesses: 0.60mm 0.75mm, and 1.00mm and provide 550MPa of yield stress strength. This inherent strength means BONDEK® offers top of the class spanning capacities. Embossed ribs at 200mm centres add to the structural and bonding strength with the concrete.
What is the range of depth of steel decking?
Our lightweight composite and non composite steel deck profiles have depths that range from 7⁄8″ to 71⁄2″. Panel lengths range from 3′-6″ to 45′. Steel deck panels are supplied with both galvanized and painted finishes to meet an array of project finish requirements.
How far can composite metal deck span?
composite deck, typical spans are 10 ft to 15 ft. “When you use a dove- tail profile, you can span 15 ft., but you have to shore it,” notes Abbata. The situ- ation then becomes one of give-and-take.
What size is bondek?
Bondek comes in thicknesses of 0.6mm, 0.75mm and 1mm and provides 550MPa of yield stress strength.
How far can 1mm bondek span?
BONDEK® has superior spanning capacities. 1.0mm BMT BONDEK® can be used as a permanent formwork spanning up to 3.6m unpropped used in steel-framed construction.
Is bondek structural?
The original name in steel formwork, BONDEK® is an efficient, versatile and robust structural decking and ceiling system for concrete slabs. It is a highly regarded formwork product offering efficiency and speed of construction.
What is slab on metal deck?
Slab Mixes and Fresh Concrete Properties for Pumpable Decks Oftentimes, a hybrid of synthetic fibers and steel reinforcement is an integral component of a warehouse slab on metal deck design due to the crack minimization provided. Pumpability and finishibility are the main drivers in developing the concrete mix design.
How do you calculate metal for a deck?
To calculate the cost of the metal decking, you will need to calculate the total square feet for each type and gauge of metal decking. You will then need to get pricing for each type and gauge. For each type & gauge, multiply the square foot quantity by the square foot unit price.
How far will bondek span?
Is bondek Galvanised?
BONDEK® steel deck has a durable galvanised coating.
Is bondek fire rated?
BONDEK® composites slabs can be designed to achieve a fire- resistance of up to 240 minutes. For fire resistance levels of 90 and 120 minutes, the BONDEK® ribs contribute significantly to the resistance of the slab in fire.
Is steel decking structural?
What is Steel Decking? Metal deck is a key Structural Building Component in steel construction. Metal Deck is made by rolling steel coil to corrugated rolled to a specified geometry. Thus, deck is made by cold forming structural grade steel coils into a pattern of flutes and ribs into various shapes.
How thick is concrete metal deck?
Dimensionally, a concrete deck is typically thicker with a minimum thickness of 3 1/2” accounting for the roof deck and concrete thickness over the top. Steel deck can be up to 2 1/4” thick for a roof deck/Resindek® system or as little as 1/4” thick with a floor plate system.
How far can you cantilever a steel deck?
Cantilevers of up to 5 feet are possible with the steel joists, which here are capped at the ends with U-Rim Joist material. The maximum beam cantilever is 24 inches.
How much does a steel deck weigh?
Steeldeck® platforms have a very good strength-to-weight ratio. A 4′ x 8′ Steeldeck® platform weighs approximately 150 lbs and supports an evenly distributed load of more than 4,000 lbs.
What is suspended slab?
Suspended slabs are slabs that are not in direct contact with the ground. They form roofs or floors above ground level. Suspended slabs are grouped into two types: one way slabs which are supported on two sides. two way slabs which are supported on all four sides.
https://www.youtube.com/watch?v=9LvWb9pSk8M