Are all TR6060 the same?
No, there are numerous different versions of TR6060 transmissions for different applications across different OEM brands.
How much power can a TR6060 handle?
Q: How Much Power Can A TR6060 Handle? One of the factors to consider when getting a transmission unit for your vehicle is the power it can handle. The TR6060 has an excellent handling value of 600-750-lbs/ft.
How much does it cost to rebuild a TR6060?
Simply put, a Tremec T56 or TR6060 rebuild starts at $1,899.99, but depends on the vehicle application and level/horsepower rating (see options below). Here at Tick Performance rebuild pricing includes freight shipping within the central US and includes a 1 year warranty.
Is TR6060 the same as T56 Magnum?
A close-up profile of TR-6060 (left) and T-56 Second gears shows the dramatic difference between them. The TR-6060 gear is 1.200 inches thick, compared to the T-56 gear’s 1.075-inch thickness. That’s a 15 percent difference, which helps illustrate why the TR-6060 has nearly twice the torque capacity.
What cars did the TR6060 come in?
Applications
- 2007 Ford Mustang Shelby GT500.
- 2008–2013 Chevrolet Corvette.
- 2008-2017 Dodge Viper.
- 2008–2016 Ford Falcon.
- 2008–2017 Holden Special Vehicles Range.
- 2009–present Dodge Challenger.
- 2009 Pontiac G8 GXP.
- 2009–2015 Cadillac CTS-V.
How much does a TR6060 cost?
$1,500-$3,000
While you might be able to find a stellar deal on a used TR-6060 from a wrecked vehicle or car being parted out, it can cost $1,500-$3,000 for just the bare transmission.
What cars did the tr6060 come in?
How much does a tr6060 cost?
What is the average cost to rebuild a manual transmission?
Average transmission repair costs range from $300 to $1,400. For example, if your manual transmission needs a new clutch, you can reasonably expect to pay around $800 to $1,500. On the other hand, transmission replacement is one of the most expensive repairs you can get. Replacements can range from $1,800 to $3,400.
How much does a Tremec transmission cost?
Prices for these units usually extends into the upper-$3,000 range, depending on the model. 2.
What cars have the Tremec tr6060?
Who makes the tr6060 transmission?
TREMEC
It is manufactured by TREMEC (formerly Transmission Technologies Corporation) and is rated for 600 lb⋅ft (810 N⋅m) of torque.
Is it hard to rebuild a manual transmission?
Again, as long as you have a place for every part and a way to clean them, the process can be completed by an amateur mechanic. While some heavier tools may be required to disassemble and reassemble, it is doable.
What is the strongest 6-speed manual transmission?
Tremec T56 MAGNUM-F 6
Tremec T56 MAGNUM-F 6-speed manual performance transmission for the GM applications. This is a bolt-in swap for your 4th-gen Camaro or Firebird. This is the strongest torque/power rating of any 6-Speed transmission ever produced! Rated at a whopping 700 lb-ft of torque capacity.
Is TREMEC owned by GM?
TREMEC is a wholly owned subsidiary of KUO Group, which is based in Mexico City. Some of the first TREMEC products were originally designed by Borg-Warner, including the widely used T-56.
How long does it take to rebuild a manual transmission?
The Better Solution A reman saves you and your transmission specialist time – bottom line. In a rebuild situation, the transmission must be removed, disassembled, parts purchased, reassembled, and installed back in your vehicle. All of this can take 3 to 5 days.
What is TR6060 Tremec?
TR6060 Tremec upgraded carbon fiber 2nd gear synchronizer ring kit. Corrects the failure problems from the original sintered metal rings. 1st or 2nd SYNCHRONIZER RING SET OF 6060 TRANSMISSIONS.
What kind of bushing do I need for a TR6060?
INTERLOCK GUIDE BOLT FOR 6060 TRANSMISSIONS. Bronze or stock shifter bushing for TR6060 / Magnum. Please verify by the picture that this is the correct part for your transmission. “B” bushing for CORVETTE only. “A” bushing for MUSTANG,CAMARO,CHALLENGER. TR6060 6th gear spacer.
What is TR6060 6th gear spacer?
TR6060 6th gear spacer. Drive gear, 7 tooth, for 6060 T56 Magnum transmissions. 12 tooth speedo rotor/reluctor for 6060 T56 Magnum transmissions.
Do you need bearings for a Tremec 6060 transmission?
NO NEEDLE BEARINGS (IF NEEDED PLEASE ORDER FROM NEEDLE BEARING LIST IN THE BEARING DROP DOWN) Bearing & races for 6060 transmissions. Caged gear bearings for all 6060 transmisssion applications. Complete shim kit for all Tremec 6060 & T56 Magnum transmissions.