Are Boxford lathes any good?
They are good solid machines. He should be open to inspection in which case it would pay you to take a look and make a much better assessment of condition than you can possibly get from 3 pictures.
Where are Boxford lathes made?
In December 2011, Boxford Lathes moved from its original home at Box Tree Mills in Halifax to a custom-built new factory in Elland. As of Autumn 2018, Boxfords are due to relocate their factory, although where is not yet public knowledge, but their current building is now up for sale.
How heavy is a Boxford lathe?
As Jason says, somewhere between 350 and 400kg, depending if yours is the 750mm b/c model, or 1,000mm. And if you split the lathe and cabinet, be warned the lathe becomes incredibly top heavy, and if lifted will try and flip itself over.
How heavy is a Boxford AUD lathe?
Are myford lathes still made?
Myford Ltd was founded by solicitor Jonathan Oxley with an original name of L & P 240 Limited. The name was changed to Myford Ltd on 26 August 2011 and continues to run from its base in West Yorkshire, where lathes are still built and refurbished.
Where are EMCO lathes made?
THE COMPANY EMCO currently employs about 800 people at a total of 6 production sites in Austria, Germany and Italy. The international, family-run company owes its success to more than 75 years of expertise and experience in the area of machine tool engineering.
What is the difference between a myford ML7 and ML7R?
The ML7R was launched in 1917 not to be confused with the ML7. This machine is a non-power cross feed Super 7 but supplied less the clutch unit. It was fitted with the Super 7 Headstock, tailstock and bed but utilised the ML7 Saddle, cross slide and top slide.
What happened to myford?
Over the years Myford’s small lathes – especially the Super 7 model – have been used loyally by enthusiasts to make models such as miniature boats and locomotives. But last weekend, the company announced it was in liquidation. They said due to the recession and cheaper foreign imports the business was being wound up.
Where are EMCO machines made?
Do they still make myford lathes?
Do they still make MyFord lathes?
How big is a MyFord ML7 lathe?
An ML7 is around 42″ long and occupies a space about 22″ front to back while a Super 7 is approximately 46″ long and a little deeper than the ML7 at around 27″. Surprisingly, a bench as little as 16″ deep from the wall will accommodate an ML7.
What is the weight of a myford Super 7 lathe?
Manual says 365 lb for the Lathe and cabinet stand. 245 lb without cabinet (both with motor.
Is Myford ML7 any good?
The ML7 is a very early design and works well. It has Plain bearings and won’t work at higher speeds. For most Model Engineering a good ML7 is about all you need from the Myford range.
What is the difference between a Myford ML7 and ML7R?
What is the difference between myford ML7 and Super 7?
The major change is in the area of the headstock which has been extensively re-designed. A key change that is not visible is in the spindle bearings – the ML7 used a pair of parallel plain white metal bearings, the Super 7 uses a bronze conical bearing at the chuck end and a pair of ballrace bearings at the drive end.