How do arrow locks work?
An arrow lock is metal and rectangular, measuring 2.005” x 3.566” x . 620”, with a keyhole in the center. When the user turns the key, a metal bar that normally protrudes from one side is moved through the lock to the other side.
What are the parts of a mortise lock?
The two main parts of a mortise lock. Left: the lock body, installed in the thickness of a door. This one has two bolts: a sprung latch at the top, and a locking bolt at the bottom. Right: the box keep, installed in the doorjamb.
What is mortise installation?
A mortise refers to the pocket cut into the door where the lock is fitted. Therefore, a mortise lockset cannot be installed on just any door. They are great for replacing the hardware on homes built before 1950. They can be used on new doors, but special preparations must be made.
How do I unlock arrow keys?
To use the arrow keys to move between cells, you must turn SCROLL LOCK off. To do that, press the Scroll Lock key (labeled as ScrLk) on your keyboard. If your keyboard doesn’t include this key, you can turn off SCROLL LOCK by using the On-Screen Keyboard.
How do you use a mortise lock?
After the key is inserted into the lock cylinder and turned, the cam drives the dead bolt of the lock cylinder to open or retract. When the door is closed, the latch fastens the door and turns the lock cylinder knob or key to lock the door to meet the safety requirements.
What is the difference between a deadbolt and a deadlock?
Well, deadlocks and deadbolts are the same in that they both need a key to lock. However, while a deadlock can only be unlocked in deadlock mode with a key, deadbolts can be locked and unlocked with a key and have a metal lock that extends from the door into the wall.
Why my arrow keys are not working?
Turn off Scroll Lock on your keyboard Look at your keyboard and see if you can find a Scroll Lock key (which might be abbreviated, such as SCRLK). If it has an illuminated status light, press the key to turn off the light. Then try Excel again. With luck, this solved your problem.
Who is the manufacturer of mortise lock installation instructions?
MORTISE LOCK INSTALLATION INSTRUCTIONS Copyright © 2011 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
How do you screw a cylinder into a mortise lock?
(see diagram and Note A. below) Screw cylinder into mortise lockbody make certain the cylinder orientation is in the correct position (see diagram below) . Using the 7/64 Allen wrench provided, hand tighten (5-10 in. lbs.) the cap screw to prevent unscrewing of the cylinder.
How do you remove the lock on a mortise door?
Mortise Lock Handing Instructions. RED Locking Screw Step 1) Move the Red locking screw to side of lock-body being locked (Fig. 1) Step 2) Push in latch then depress catch plate with screw driver (Fig. 1) Catch Plate Step 3) Pull latch out of lock-body and turn latch over (Fig.
How do you install a cylinder lock?
CYLINDER AND TURN-PIECE INSTALL Cylinder Install: – Push cylinder collar over cylinder then thread cylinder into lock-body – Secure cylinder with set screw 4 6 Spindles Keypad ribbon cable Outside of Door Installation of Outside Escutcheon 2A.