How do I capture an image using sysprep?

How do I capture an image using sysprep?

Overview – Windows Capture Process

  1. Run Sysprep Utility.
  2. Boot a virtual machine in WinPE.
  3. Run DISM Command to cature the image, store the image either to network share/USB storgae.
  4. Once the process completed, you will get Windows Image (.wim) file.

How do I make a capture image?

Create a Windows Boot Image

  1. Right-click on your boot image and then click on Create Capture Image.
  2. Provide a capture image name, image description, file name and location where you would like to place this file.
  3. Click Next.
  4. Wait for the wizard to be completed (This can take several minutes to complete, so be patient).

How do I capture an image with WDS?

Steps to Create a Capture Image using the WDS console:

  1. On WDS Server, open Server Manager Console.
  2. Click on Tools and select Windows Deployment Services.
  3. Expand the Server name. Expand and click on Boot Images.
  4. Right-click on the existing boot image and select Create Capture Image.

What is Discover image in WDS?

Discover images are boot images that force the Setup.exe program to start in Windows Deployment Services mode and then discover a Windows Deployment Services server. Typically these images are used to deploy images to computers that are not capable of booting to PXE.

How can you capture image with WDS?

How do I create a capture image using WDS?

How do I reimage my computer with WDS?

Steps to Capture Image using WDS (WDS Images) Open Windows Deployment Services (WDS) console, expand Server name and select “Boot Images”. Right click on the boot image, select Create Capture Image to create the capture image.

How do I create a Discover image in WDS?

Steps to create WDS discover image.

  1. In the Windows Deployment Services MMC snap-in, expand the Boot images node.
  2. Right-click the image that you want to use as a discover image.
  3. Click Create Discover Boot Image.
  4. Follow the instructions in the wizard, and when it is completed, click Finish.

What is Boot Image and install image in WDS?

You cannot create an install image of Windows while Windows 8 is running. You must boot the computer using Windows PE. In the Windows Deployment Services world, a Boot Image is a bootable copy of Win PE that is setup to automatically contact the WDS Server over the network when the computer boots up.

How do I deploy an image with WDS?

An operating system deployment transmission is prepared on the WDS server….To import an image into WDS, perform the following steps:

  1. Open the Windows Deployment Services console.
  2. Click Install Images.
  3. Choose whether to create a new image group or to use an existing image group.
  4. Specify the location of the image file.

What is WDS imaging?

Windows Deployment Services (WDS) is a network-based imaging software developed by Microsoft. Windows Deployment Services is used to deploy Windows installation like Windows 7 over a network.

Can I run Sysprep after cloning?

Therefore, after cloning, you will have to sysprep the server. Sysprep removes PC-specific information from a Windows installation, “generalizing” the installation so it can be installed on different PCs.

Can you run Sysprep after imaging?

Dependencies. You must run Windows Setup before you use Sysprep. You need a tool to capture an image of the installation, such as DISM – Deployment Image Servicing and Management Technical Reference for Windows or other disk-imaging software.

How to use the Windows image capture wizard (WDS)?

In case the network card is not recognized, it is necessary to provide a USB disk with enough space to store the image. The capture image must be enabled on the WDS server. 1. Start the computer on the network (Boot PXE F12) and select the capture image. 2. When starting the Windows Image Capture Wizard, click Next 1 .

How do I upload an image to the WDS server?

Optionally select the option to upload the new image to the WDS server. If you do want to do this, click the Connect button to authenticate with the WDS server. Once you have entered valid credentials, you can select an Image Group to add the new image to.

How to capture and deploy a volume Using WDS?

You have to enter three pieces of information. You should select the volume letter that you want to capture using WDS. This highlights a limitation of WDS; you can only capture and deploy a single volume. You might notice something odd here.

What is the IP address of WDS server and boot image?

The IP address of WDS server is 192.168.1.11 and path of boot image on WDS server is “Bootx64Imagesboot.wim”. 22. On Windows Setup console select location and keyboard or input setting and click on Next. 23.