How do I connect my Linksys WRT54GL?

How do I connect my Linksys WRT54GL?

How to Set Up a Linksys WRT54G Wireless G Router

  1. Step 1: Connect the Modem. Plug the Ethernet cable from your cable or DSL modem into the Internet port on the router.
  2. Step 2: Connect Your Computers.
  3. Step 3: Connect the Power.
  4. Step 1: Log In.
  5. Step 2: Open Wireless Settings.
  6. Step 3: Name the Network.
  7. Step 4: Set Up Security.

How do I reset my Linksys WRT54G router password?

Reset Button

  1. Press the reset button for 30 seconds.
  2. Open up your Web browser and enter “192.168. 1.1” in the address bar.
  3. For the login, leave a blank ID and enter “admin” as the password.

What is default password of Wi-Fi?

NOTE: Resetting your router to its default factory settings will also reset your router’s password. The router’s default password is “admin” as for the username, just leave the field blank. IMPORTANT: Make sure that the Power LED of the router is blinking when you press the Reset button.

How do I reset my Linksys router admin password?

  1. Log in to the router’s web-based setup page. To do this you can either enter “192.168.
  2. Enter your router’s local admin password and then click Sign In.
  3. On the Basic tab beside Router Password, click Edit.
  4. Enter your new Router password hint in the field provided.
  5. When the confirmation prompt appears, click Yes then OK.

What is the WIFI admin password?

The router’s default Password is “admin”, as for the User name, you can leave the field blank. For security purposes, it is recommended to change the default password.

How to hard reset Linksys WRT54GL?

Linksys WRT54G Reset Button Location. To reset your router, use the following steps: Press the reset button for 30 seconds. The settings should now be returned to the factory default settings, meaning any changes you had made would be deleted. Open up your Web browser and enter “192.168.1.1” in the address bar.

How to configure Linksys WRT54G wireless router?

Log In Visit the Web address 192.168.1.1 in any Web browser on a computer connected to the router.

  • Open Wireless Settings Image Credit: Image courtesy of Linksys Open the Wireless tab in the router’s setup interface.
  • Name the Network Image Credit: Image courtesy of Linksys Pick a name — SSID — for your wireless network.
  • Set Up Security

    • How to secure your Linksys router WRT54G?

    Open any web browser (Internet Explorer or Safari). Enter your router’s IP address in the Address bar,then press[Enter].

  • Enter “admin” in the Password field then leave the User name blank.
  • Click on the Administration tab > Firmware Upgrade sub-tab.

    • How to set a password on a Linksys router?

    Turn on the router. Most Linksys routers don’t have an on/off switch,but turn on automatically when you plug it into an outlet.

  • Reset the router. Wait until the Power light is blinking and then press and hold the Reset button for 10 seconds.
  • Turn off the router and turn it on again.
  • Wait for the Power light to stop blinking.