How do I reset my dogtra remote?
The code setting method is as follows:
- 1) Turn the transmitter on by pushing the ON/OFF Button located on the right side.
- Within 5 seconds after taking the two red dots apart, hold down the Nick and the Constant button simultaneously for 3 seconds, or until the rapid green blink resumes to a slower paced green blink.
How do you use a dogtra remote?
TRAINING SYSTEM To turn the receiver on, place the magnetic red dot on the back of the transmitter to the red dot on the receiver. Hold the two red dots together for a moment until the LED light on the receiver comes on. To turn off the unit, repeat the same procedure holding the two red dots together momentarily.
How do I connect my dogtra collar to my phone?
Pairing: Use the Select button to set the GPS connector to Collar to pair the connector with the receiver. Set the GPS connector to Phone to pair the connector to a smartphone. Press and hold down the Connect button until the LED blinks rapidly. The GPS connector will now be ready for pairing.
Why is my dogtra not working?
Make sure your battery is charged in both the collar and the transmitter. Low battery charge can make for inconsistent functioning. Make sure both pieces are turned on and that the unit is properly synced so that the collar is receiving a signal from the transmitter.
How do I reset my e-collar remote?
Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. You may need to hold both units 2-3 feet from each other before this occurs. Once the Receiver Indicator Light has flashed 5 times, the Collar Receiver has been reset and will begin flashing as normal.
How does the dogtra shock collar work?
Dogtra products contain electrical and magnetic components that emit low level electromagnetic waves and radio frequencies. These electromagnetic waves or radio frequencies may interfere with pacemakers, defibrillators, or other medical devices.
How long do dogtra collars last?
With normal use you can expect 2 or 3 days of run time from a full charge. Turning the e-collar off when not in use, a full charge can last over a week.
How do you activate a dogtra collar?
To turn the receiver on, place the magnetic red dot on the back of the transmitter to the red dot on the receiver. Hold the two red dots together for a moment until the LED light on the receiver comes on. To turn off the unit, repeat the same procedure holding the two red dots together momentarily.
Why is my dogtra collar not working?
How do I program a new e collar remote?
Turn off the collar receiver. Position the Transmitter ON/OFF Magnetic Red Dot to the Collar Receiver ON/OFF Magnetic Red Dot more than 5 seconds till Green LED of Receiver blinks rapidly. 4.) Press the stimulation buttons “M” and “C” of Transmitter simultaneously within 5 seconds and hold for 2 seconds.
How do I reset my remote dog collar?
How do I turn on my dogtra remote?
How long do dogtra batteries last?
The batteries in the units have an average standby life of 34-hours. With moderate nick, constant or pager use, battery life will decrease to approximately 20 hours. If the unit will be stored unused for an extended period of time, we recommend fully charging the batteries every 2 months to maintain the batteries.
Can you overcharge an E collar?
The rechargeable Lithium Ion (Li-Ion) batteries are not memory sensitive, do not require depletion before charging and cannot be over charged.
Can I get a replacement transmitter for dogtra 2500T&B?
Replacement transmitter for Dogtra 2500T&B. For duplicate transmitters, please call us or email us. Replacement transmitter for Dogtra 2500T&B. For duplicate transmitters, please call us or email us.
What is the model number for a dogtra receiver?
Dogtra receiver number 4, for Dogtra models: 2300NCP, 2302NCP, 3500NCP, and 3502NCP… Dogtra receiver number 5, for Dogtra models: 300M, 302M, 7000M, 7002M, and M Plus…
What devices are compatible with the dogtra dual dial?
The Dogtra DUAL DIAL transmitter is an advanced expandable handheld controller, compatible with the iQ PLUS/iQ MINI, 200C/202C, 280C/282C, ARC, and 1900S/1902S. It is equipped with two sets of dials and buttons for 127 Nick/Constant stimulation levels, Pager vibration, OLED screen, Stimulation Level Lock, and up to 1.5 mile range.
What kind of GPS collar does dogtra use?
Additional LED GPS Collar for the expandable PATHFINDER tracking and training system and PATHFINDER SE KIT. Currently only available in black, this new LED GPS Collar features a Beacon Light that emits every .1 seconds. The Dogtra Training Box (3) is designed to fit the Dogtra BALL TRAINER.