How do I reset my HP LaserJet P2015?

How do I reset my HP LaserJet P2015?

Press and hold the GO button on the control panel of the printer. Turn on the printer and continue to hold the GO button for at least 50 seconds. During this process the Attention, Ready and Go lights turns on together. Then the Attention and Ready lights turns off, leaving just the GO light illuminated.

How do I reset my HP LaserJet printer?

Open the Setup menu. Use the left and right arrows to navigate to the Printer Maintenance menu. Navigate to the Restore menu, and then press the OK button. Navigate to Restore Factory Defaults, and then press the OK button.

How do you fix a paper jam on a HP Laserjet p2035?

Replace the print-cartridge, and close the print-cartridge door. If no paper was jammed inside the print-cartridge door, open the jam-release door at the back of the product. If jammed paper is visible, grasp it with both hands and slowly pull it out of the product. Close the jam-release door.

What does service fuser error mean?

Quick Guide: The Lexmark printer Fuser error indicates that the peripheral has detected some problems with the fuser unit installed. The printer displays this error as 920. xx Service Fuser error, where x denotes any number. This error also occurs if the printer did not reach its optimum operating temperature.

How do I clean my HP 2015?

HP LaserJet P2015 Printer series –

  1. Press the print-cartridge-door button, and then remove the print cartridge from the printer. CAUTION.
  2. With a dry, lint-free cloth, wipe any residue from the media-path area and the print-cartridge cavity.
  3. Replace the print cartridge, and close the print-cartridge door.

How do I change the ink in my HP LaserJet P2015?

Toner cartridge replacement

  1. Press the print-cartridge-door button, and then remove the print cartridge from the printer.
  2. Remove the new print cartridge from the packaging.
  3. Bend the tab on the left side of the cartridge to break it loose.
  4. Pull the tab until all the tape is removed from the cartridge.

How do I reset my HP M601?

HP LaserJet M600, M601, M602, M603 Reset the maintenance count instructions

  1. Press the Home button on the printer’s control panel.
  2. Open the “Administration” menu.
  3. Select “Manage Supplies”.
  4. Select “Reset Supplies”.
  5. Select “New Maintenance Kit”.
  6. Select “Yes” to reset the maintenance kit counter.

How do I factory reset my HP m577?

From the HP User Guide:

  1. From the Home screen on the printer control panel, scroll to and touch the Administration button;
  2. Open the following menus General Settings > Reset Factory Settings;
  3. A verification message advises that completing the reset function might result in loss of data.

Why does my HP printer say paper jam when there isn’t one?

Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Clean the rollers inside the printer, and then try to print again.

What to do when your printer says there is a paper jam but there isn t?

Sometimes a paper jam error persists even though there is no jammed paper (false paper jam). Reset the printer, which might clear a false paper jam error, and then try to print again. With the printer turned on, disconnect the power cord from the printer. Unplug the power cord from the power source.