How do I secure my Huawei router?

How do I secure my Huawei router?

Follow these configuration steps:

  1. Connect your computer/phone to the router’s Wi-Fi(check the nameplate at the bottom of the router for the default Wi-Fi name, no password) , or connect the computer to the router’s LAN port using an Ethernet cable.
  2. Click My Wi-Fi, set Security as WPA/WPA2 PSK hybrid, and click Save.

How do I log into my Huawei B593?

Type 192.168. 1.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Huawei B593 is (blank).

How do I setup my Huawei B593 LTE router?

HUAWEI LTE CPE B593 4G Router Installation and Firmware Upgrade

  1. You should start by inserting the SIM card and then plug the power adapter to the B593 4G router.
  2. Now you need to connect the router to your computer via wireless network (WiFi).

How use Huawei CPE B593?

Connect the PC to the modem over WLAN.

  1. Turn on the power button of the modem.
  2. WLAN is enabled.
  3. Select your network from the wireless network list, and then press Connect.
  4. If the PIN request is activated, log in to the network management page ( and enter the correct PIN in the provided field.

Is a Huawei router safe?

LAS VEGAS — A German security researcher says he has uncovered several security holes in routers made by China-based Huawei that are used by many Internet service providers — vulnerabilities that could allow attackers to take control of the devices and snoop on peoples’ traffic.

How do I know my Wi-Fi is secure?

The Wifi Settings opens. Click Manage known networks. Click the current wifi network your are connected to, and click Properties. Next to Security type, if it says something such as WEP or WPA2, your network is protected.

How do I change my password on my Huawei router?

Connect your phone to the router’s Wi-Fi network. Open the HUAWEI AI Life App from your phone and go to the Router screen, then go to Show more > Wi-Fi management > Wi-Fi. Enter a new Wi-Fi name and password in the Wi-Fi name and Wi-Fi password fields, then touch √ in the upper right corner of the screen to confirm.

How do I reset my Huawei B593 router?

Reset the Huawei B593 router The reset button is located on the back of the router. Use a sharp tool eg. paperclip or a pen to press the button. Press and hold the button for 20 seconds, the router will restart and reset to the factory settings.

How do I configure my Huawei LTE router?

Personal Huawei LTE Configuration

  1. Enter the user ID and password; typically “admin” and “admin”.
  2. From the tab menu, choose “Settings”, then “Dial-Up”, and then “Profile Management.”
  3. To add a new profile, click “New Profile.”
  4. Set the profile name to “NMU”.

Is Huawei really a security risk?

Reports of forced labor exploited by Huawei are numerous and well documented. All this raises the risk of companies that do business with Huawei being caught up in the growing web of sanctions against Xinjiang officials and institutions.

Do Huawei routers spy on you?

Huawei has stated that its products posed “no greater cybersecurity risk” than those of any other vendor, and that there was no evidence of the U.S. espionage claims. The company had also partnered with British officials to establish a laboratory to audit its products.

Where is the network security key on Huawei?

This security key is your WiFi password. Only devices that have connected with this security key will have access to your WiFi network. The security key can be found on the bottom of your modem and also on the box it came in. Note: You can change the preset security key.

What is the password for Huawei Router?

Huawei Router Login Guide The default username for your Huawei router is admin. The default password is admin.

How do I change my admin password on my Huawei router?

Go to More Functions > System Settings > Change Login Password. Enter your current password in the Current password field, enter your new password in the New password field, enter the new password again in the Confirm password field to confirm, and click Save.