How do you measure for a gas fireplace burner?

How do you measure for a gas fireplace burner?

Helpful Tips:

  1. Measure the front opening of your fireplace.
  2. Measure the back width of your fireplace.
  3. Measure the depth of the floor from back wall to the front of your fireplace.
  4. Measure the inside height of the fireplace from the floor to the lowest point inside the fireplace.

When should I replace my gas fireplace burners?

Type of gas logs: A well maintained vented log set with ceramic logs will last a very long time, in some cases 10 or more years. A well maintained ventless log set with ceramic logs can also last a long time, but, if heavily used, will begin to wear in 3-5 years.

What is a burner on a gas fireplace?

Burners are installed in gas fireplaces to support the log sets and to power and control flames.

How much is a gas fireplace kit?

Depending on how advanced of a system you need, gas fireplaces range in cost from $400 (firebox only) to upwards of $3,000 (direct vent fireplace system).

How do I know what size fireplace insert I need?

Start with Dimensions Length: The distance from one side of the fireplace to the other. Measure the length at both the opening and back of the firebox. Height: The distance from the floor of the firebox to the top. Measure in the front and back to ensure an optimal fit.

How do I know what size gas logs to buy?

Determine The Size Of Your Gas Logs

  1. Measure the front width of you fireplace.
  2. Measure the width at the back of your fireplace.
  3. Measure the depth from the front to the back of your fireplace.
  4. Measure the height from the top to bottom of the front your fireplace.

What is the average lifespan of a gas fireplace?

How Long Can a Gas Fireplace Last? Generally speaking, you can get a good ten to fifteen years of use before you need to replace your gas fireplace.

How often should you have a gas fireplace serviced?

If you like a roaring fire from autumn all the way through spring, you should conduct or schedule service once a year, ideally early in the summer. If you only use your gas fireplace occasionally, you can probably get by with a fireplace service check every two years.

Do gas fireplaces heat a room?

Gas fireplaces are an efficient type of fireplace that are typically good at providing heat for the room in which they are located, and can be much more efficient and produce more heat compared to the existing masonry fireplace they replace.

Do logs in a gas fireplace need to be replaced?

A: Gas log sets require no daily maintenance but should be inspected annually by a professional. Logs need to be inspected for cracks and breaks and replaced if they are not in sound condition.

Is it expensive to run gas fireplace?

A standard 20,000 BTU gas fireplace will use about 20 cubic feet of natural gas per hour. Given that price of natural gas is about $1.09 per 100 cubic feet, running a standard-sized gas fireplace will cost about $0.22/hour at 100% heating output. In short: Gas fireplaces are quite inexpensive to run.

What’s the difference between a gas fireplace and a gas insert?

Gas fireplaces are very similar to gas inserts. They are made the same way, with the box-within-a-box setup. However, the difference between gas fireplaces vs. gas inserts is that a built-in gas fireplace doesn’t require an existing fireplace or chimney.

What is the cost of a gas fireplace insert?

The average cost of a gas fireplace insert is $1000. There are many factors to consider when purchasing a gas fireplace insert, such as size, type, and features. The average cost of a gas fireplace insert is $1000, but it is important to find the right one for your needs.

Which is better ceramic or concrete gas logs?

Vent-free gas logs are available in two types of logs, ceramic fiber logs and concrete refractory logs. The ceramic fiber logs will glow after about 15 minutes of use giving a more realistic burn where the concrete refractory logs will not glow at all but are more durable and intricate in their detail.