How do you put ribbon on a label printer?
Desktop Barcode Printers
- Open the top of the printer.
- Unwind part of the ribbon to wrap around the take-up spool.
- Place the ribbon roll on the ribbon supply spindles.
- If your ribbon core has notches, rotate the roll until those notches lock into place.
How do I setup my zebra GC420t printer?
Configuring the Zebra GC420t to Print in Stamps.com
- Hold down the Windows key on your keyboard and press R. This should open the Run window.
- In the Run window, type “control printers” (without quotation marks).
- Click the OK button.
- Right-click on your Zebra GC420t printer driver icon and select Printing Preferences.
What is ribbon in Zebra printer?
Ribbons are used with Thermal Transfer labels (Thermal Transfer Printing) to produce an image that is compatible with a variety of environments and applications. Printers that use ribbons will have spindles to hold and control the ribbon during printing to prevent ribbon wrinkle and monitor ribbon out conditions.
What does Warning ribbon in mean on a Zebra printer?
If your ZM400 has ribbon installed and your menu setting is set to Direct Thermal then you will receive the Warning Ribbon In error on your LCD screen. Make the changes in the menu to ensure the printer is in Thermal Transfer mode and this will most likely solve your problem!
Why is Zebra printer flashing red?
Flashing Red: The printhead is open. Close the top cover and then press the Feed button to resume printing.
How do I change my printer ribbon?
Make sure the printer is turned OFF!
- Open the access cover and center the printhead.
- Remove the old ribbon cartridge.
- Unpack the new ribbon cartridge and install it on the printhead.
- Press gently on the ribbon cartridge until you feel it click into place.
How long does a zebra ribbon last?
Thermal ribbons are made out of wax or resin and are at a disadvantage against toner cartridges when stored. According to Zebra Card Printer Solutions, thermal ribbons can be stored for about two years before drying out and becoming unusable.
What is thermal ribbon?
A thermal transfer ribbon is a thin film that is wound on a roll that has a special black coating on one side. This coating is usually made from a wax or resin formulation. During thermal transfer printing, the ribbon is run between the label and the printhead, with the coated side of the ribbon facing the label.
How do I fix the mechanical error on Zebra ZXP Series 3?
Solution
- Open the printer and clear any card jams Read More>>
- To prevent further jams: Make sure the cards being used meet the specifications required by your printer according to the user’s manual. Make sure cards are loaded properly Read More>>
How do you troubleshoot a Zebra label printer?
RUN A PAUSE TEST PRINT Keep the pause button pressed until all the lights flash once. This will load 9999 test print labels into the printer. Release pause and you are ready for troubleshooting. Pause test is the best way to quickly determine if the printer is functioning properly.
Why is my Zebra printer not printing?
Zebra printer not working issues usually occur due to temporary glitches or incorrect printer configuration. To resolve the issue, perform a power cycle, cancel the pending job or set the printer as default. If that does not work, check for driver issues or try to reset the device to factory default as a last resort.
How do you put ribbon on a cartridge?
Insert the ribbon cartridge into the printer at an angle as shown below, then press firmly on both sides of the cartridge to fit the plastic hooks into the slots on the printer. Slide the ribbon guide into the print head until it clicks in place. Caution: When inserting the ribbon guide, press firmly until it clicks.
What is ribbon cartridge?
In thermal transfer printing, ribbon cartridges are used, and these ribbon cartridges contain ink that resembles the consistency of crayon or wax. During the printing process, heat-sensitive paper is inserted into the machine and then squeezed between the printer’s thermal head and platen roller.
What kind of interface does a zebra gc420t have?
P1052686-001 GC420t™ User Guide 5/22/2012 Connecting your Printer to a Computer The Zebra®GC420 printers support a variety of interface options and configurations. These include: Universal Serial Bus (USB) interface, RS232 Serial, and Parallel (IEEE 1284.4).
How do I feed labels to my gc420t™?
5/22/2012 GC420t™ User Guide P1052686-001 Feed Button • Tap the Feed button once to force the printer to feed one blank label. • Press the Feed button to take the printer out of a “pause” condition. The printer is put into “pause” by either a programming command or an error condition.
What is the user guide for the gc420t?
P1052686-001 GC420t™ User Guide 5/22/2012 Printer Memory Management and Related Status Reports To help you manage printer resources, the printer supports a variety format commands to manage memory, transfer objects (between memory areas, import and export), object naming, and provide various printer operating status reports.
How do I install the gc420t™ printhead spring?
P1052686-001 GC420t™ User Guide 5/22/2012 2. Attach the ground wire and secure it with the screw. Use a #2 Phillips driver to tighten it. 3. Slip the left end of the printhead spring into the left side of the ribbon carriage; then slide the right end into the other side. The angle of the “V” fits into the indent on top of the printhead bracket.