How do you size a slurry pump?

How do you size a slurry pump?

Selecting a Slurry Pump:

1. Determine the flow rate. To size and select a pump, we first determine the flow rate.
2. Determine the static head.
3. Determine the friction head.
4. Calculate the total head.
5. Select the pump.

What is the pump head calculation?

The head is usually the maximum height that the pump can lift, and is indicated by H. The most commonly used pump head calculation formula is H = (p2-p1) / ρg + (c2-c1) / 2g + z2-z1.

How do you calculate the discharge of a submersible pump?

Submersible pump flow calculation formula: 60HZ flow × 0.83 = 50HZ flow 60HZ lift × 0.69 = 50HZ lift 60HZ power ÷ 1.728 = 50HZ motor power motor output power = Q (flow) × H (head) / 367.2 / efficiency × 1.15 motor output power = shaft power × 1.15 pump efficiency = Q × H × 0.00272 / motor power Q represents flow; H …

How do you calculate slurry volume?

The % slurry is calculated using the equation: 100 × (volume of drained resin – volume of frit)/10. The slurry volume required for a desired column bed volume (volume of resin settled by gravity, Vgs) can now be calculated using the equation: 100 × Vgs/% slurry.

What is a 6’4 pump?

6x4D-AH Slurry Pump is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design, The 6×4 slury pumps are mainly used in solids containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corrosive liquids.

How do you calculate pump motor kw?

Pump Power calculation Formula: Pump Power P(kW) = q(m3/hr) x ρ(kg/m3) x g(m2/s) x h(m) x p(Pa) / 3600000. The same way pump power in horsepower formula can be written as, Pump Power P(HP) = q(m3/hr) x ρ(kg/m3) x g(m2/s) x h(m) x p(Pa) / 2685600. Also above pump power is required to lift the liquid to head meters.

How do you calculate pump output?

Pump Output Calculation for Duplex Pump and Triplex Pump

1. Triplex Pump Output = 0.000243 × (Liner Diameter ) 2 × (Stroke Length) Where,
2. Triplex Pump Output = 2.3576 × 10-9× (Liner Diameter ) 2 × (Stroke Length) Where,
3. Duplex Pump Output = 0.000162 × S × [2(D)2 – d2]
4. Duplex Pump Output =1.57172 × 10-9 × S × [2(D)2 – d2]

How do you calculate slurry flow?

1) Calculate the water required to add to the solids to achieve the required solids concentration by weight 2) Calculate the volume flow rate of the slurry 3) Calculate the slurry SG (or pulp density) 4) Calculate the Volume % solids 5) Calculate the Limiting Settling Velocity, using the Durand factor and the Durand …

How is slurry concentration measured?

What is froth factor?

The ‘froth factor’ is a measure of the air contained in the froth. It is quantified by filling a measuring cylinder or bucket, of known volume, with froth and measuring the froth column. After air dissipation the remaining water and solids volume is measured.

How do I calculate pump motor size?

Pump Hydraulic Power (ph) = (D x Q x H x9. 87)/1000 =3KW. Motor/ Pump Shaft Power (ps)= ph / pe = 3 / 80% = 4KW. Required Motor Size: ps / me =4 / 90% = 4.5 KW.

What is the pressure of 1 hp pump?

1 HP Water Pump, Pressure:5 Bar