How much horsepower does a CAT D6 have?
The 215-horsepower Caterpillar D6 dozer offers either electric drive (XE) or fully automatic powertrain, with operating weight ranging from 47,949 to 53,126 pounds.
What engine is in a D6 cat?
Both the 60 inch gauge D6 (4R series) and 74 inch gauge D6 (5R series) were powered by the new Caterpillar D468 6-cylinder diesel engine which produced 72 flywheel horsepower.
How big is a D6 Cat dozer?
Caterpillar D6 Specs
| Engine | |
|---|---|
| MAKE | Caterpillar |
| Dimensions | |
| LENGTH W/O BLADE | 10.5 ft in / 3200 mm |
| WIDTH OVER TRACKS | 6.5 ft in / 1980 mm |
How much does a 1970 D6 weigh?
Caterpillar D6
| Dimensions & Tracks | |
|---|---|
| Wheelbase: | 85.625 inches 217 cm |
| Weight: | 16695 to 17330 pounds |
| 16-inch tracks | |
| Full dimensions and tracks … |
How much does a CAT D6 dozer cost?
New models start at around $450,000 for the base unit. CAT D6T New: Used prices start around $100,000 for older models, with more recent models selling for around $500,000. New models have a base price of around $450,000.
How much does a D6 Cat weight?
49108 lb 22275
D6 VPAT
| Operating Weight | 49108 lb 22275 kg |
|---|---|
| Ground Pressure | 7.1 psi 49 kPa |
| Width of Standard Shoe | 24 in 610 mm |
| Blade | VPAT VPAT |
| Blade Capacity | 5.4 yd³ 4.1 m³ |
How much fuel does a D6 dozer use?
A Caterpillar D6 dozer is said to burn between 3.5 gal. (13.3 L) and 6.5 gal. (24.7 L) of diesel an hour when operating under moderate conditions. Fuel consumption of larger dozers like the D11 can be five times that much.
What does SU blade mean?
S-U (Semi-U) Blade It’s narrower, less curved, and its side wings are smaller compared to a normal U-blade. This design makes it ideal for pushing soil across long distances. This blade attaches in the lower back of the blade using angled stabilizing braces and either one or two hydraulic tilt cylinders.
Which dozer is the best?
The top leading manufacturer bulldozer brands are:
- John Deere Dozers. John Deere machinery is seen in the industry as one of the leading brands, with their expansive range of John Deer dozers among some of the world’s best.
- Komatsu Dozers.
- Caterpillar Dozers.
What size dozers push over trees?
For most tree removal we use a 200 clc deere that will knock trees out faster and easier. If i was getting a dozer it would be 5 or 6 cat or mabe 750 850 deere.
How long do dozer tracks last?
All the components in a dozer undercarriage are designed to wear out together at roughly 4,000 hours, or half the service life of the engine. A midlife tune-up typically happens at 2,000 hours when the pins and bushings need to be turned.
What size dozer is best for land clearing?
“However, you want a larger D6 to pop pine stumps out of the ground after clearing timber.” The larger D8 and D9 dozers are meant to move large amounts of dirt quickly. “If you want to build a 1-acre pond, a D6 is ideal if you don’t need to push dirt more than 200 feet,” said Strain.
Can you clear land with a bulldozer?
Excavators are great for clearing land the has a lot of fallen trees, shrubs, and debris on the ground. Bulldozers are better if you want to remove standing trees, boulders, and other large debris. The best solution is to use bulldozers to knock everything over and excavators to remove it all.
What is alot of hours for a dozer?
A dozer with more than 4,000 hours on it that has a recent undercarriage replacement and still has good life left in the engine and hydraulics might be an even better buy. In many cases, warranties follow the machine and typically go to 5,000 or more hours.
Can bulldozers take down trees?
A bulldozer can help make quick work of tasks like downing small trees, pulling up stumps, combing for roots, and collecting brush and other debris. Fast, efficient clearing translates to hours and dollars saved.
What’s new in the Cat D6 Dozer?
The latest Cat D6 dozers feature a new clamshell bucket with an extended dipper edge that makes it easy to transport large amounts of material. This capability, along with an increased amount of rollers in the blade mounting system, does a better job of smoothing out the ride when heavier loads are being hauled.
What is a Caterpillar D6 track-type tractor?
The Caterpillar D6 track-type tractor is a medium bulldozer manufactured by Caterpillar Inc. with a nominal operating weight of 18 tons. The military versions were classified as the SNL G152 medium tractor, under the G-numbers classification system used for army tractors.
When did the Caterpillar D6 engine come out?
The numbering was changed to the D6 in 1937. Caterpillar first introduced the entirely new D6 in 1941 with the 4R & 5R series. This was powered by the D4600 engine of 55 hp (drawbar). The D6 4R/5R was replaced by the D6 8U & 9U series, fitted with the 6-cylinder D318 engine of 66 hp, in 1947.
What are the technical specifications of the d6/d6 Xe?
For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full D6/D6 XE Technical Specifications. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).