What are Laser sails made of?

What are Laser sails made of?

Three rigs are recognised by the International Laser Association: original Laser standard with a sail area of 7.06 m²; the Laser Radial with a sail area of 5.76 m²; and the Laser 4.7 with a sail area of 4.7 m². The Laser’s hull is constructed from fibreglass.

What fabric is used for sails?

Polyester has for decades been the most commonly used sail fiber because it is strong, durable and relatively inexpensive.

What is modern sailcloth made of?

Polyester (PET) Polyethylene terephthalate, the most common type of polyester, is the most common fiber used in sailcloth; it is also commonly referred to by the brand name Dacron. PET has excellent resiliency, high abrasion resistance, high UV resistance, high flex strength and low cost.

How do I identify a Laser sail?

For Lasers up to sail number 148,199, the hull identification number (or HIN) is a number molded into the deck and should be located either on the transom (rear of the boat) or on the deck under the bow eye.

Are Laser sailboats still made?

The Laser sailboat is no longer in production in North America and Europe and because the Laser trademark is being held by the former builder, the boat’s name had to be changed in order for Bruce Kirby’s design to continue to be sold world-wide as a One Design class.

How much does a new Laser sailboat cost?

about $5,500
A new Laser will cost about $5,500. A used Laser in good condition will usually cost between $1,500 and $3,500.

What is Dacron material?

Dacron is a registered trade name for a polyester fiber made by DuPont. Dacron is especially known for its durability, consistency, and quality. Dacron, unlike natural fibers, is hypoallergenic, non-absorbent, and mildew-resistant.

What were 18th century sails made of?

Since the most common fiber materials that composed eighteenth century French sailcloth were hemp, linen, and blends of hemp or linen with cotton (according to Marquardt 1992), and since microscopic analysis did not indicate the presence of cotton, fiber twist tests were conducted to differentiate between hemp and …

How can you tell the age of a Laser sailboat?

How old is my laser sailing dinghy? To determine the age of your laser dinghy, you will first have to check the number embedded in the hull. Usually, it is located beneath the bow eye or in the transom.

How do I find my laser sail number?

Where is your sail number located

  1. For Laser sailboats built after 2010 the sail number is located in the rear of the cockpit on a sticker.
  2. For Laser Sailboats Built Prior to 2010 the sail number can be decoded from the Hull Identification Number Located on the stern or on very early lasers under the bow eye.

Who manufactures Laser sailboats?

LaserPerformance
LaserPerformance is an Anglo-American dinghy manufacturer- the world’s largest producer of small sailboats. LaserPerformance manufactures many sailboats including: Laser, Sunfish, Laser Pico, Bug, Laser Vago, Laser Bahia, Club FJ, Club 420, Z420, Vanguard 15, Dart 16, Funboat and Optimists.

Who owns Laser sailboat?

Not so fast, says Laser Performance CEO, Bahman Kia, whose company owns the Laser trademark. “Changing the name requires changing the [ILCA’s] constitution, which requires that two-thirds of the membership vote for it,” Kia says.

Can you still buy a Laser sailboat?

Buy a New Laser Sailing Boat You have a choice of the Laser Standard (full rig), Laser Radial and Laser 4.7 rigs so you get your perfect sail size. We work with you to tailor a custom package to suit your needs and can also deliver your brand new boat direct to your door, or sailing club.

Is Dacron better than polyester?

Dacron has a structural advantage because it is less reactive. It doesn’t respond to moisture the same way polyester will. Polyester will wick up moisture, making it the ideal material for workout clothes. Dacron is significantly less reactive, as its closed structure repels moisture.

What were 17th century sails made of?

Sailcloth was woven from flax fibre during the period when England, France, and Spain were striving for supremacy of the seas. Fibre flax is still used for sails, although cotton has replaced it for better quality canvas.

What were original sails made from?

The first sails were most likely animal skins that were used to harness wind power for rafts or boats consisting of a single log. The next probable step was the use of woven reed mats stretched between poles.

How heavy do you have to be to sail a Laser?

Laser Radials need a crew weight of 121 – 154 lbs (55 – 70 kg) for racing. A Laser 4.7 has a recommended crew weight of 77.2 – 121 lbs (35 – 55 kg). If you’re doing leisure sailing, these crew weights are far higher. Depending on local conditions, you can add 22 lbs (10 kg) on the crew weight ranges.

What is insignia sailcloth used for?

Insignia material can also be used to sacrificial sun covers on furling sails, but it doesn’t last as long as acrylic. All of our sailcloth for sail by the yard is available in several weights in a variety of eye-catching, bright colors.

Where can I buy Laser sailboat and ILCA Dinghy parts?

West Coast Sailing is your ultimate source for all things Laser and ILCA dinghy sailing, trusted by sailors worldwide and supporting the sailing community since 2005. If you’re looking for Laser sailboat and ILCA dinghy parts, you’ll find virtually any item you need to repair or maintain your sailboat here.

How long does the insignia cloth and vinyl last?

Our insignia cloth and high performance vinyl lasts as long as the life of your sail and comes in standard color options (red, black, blue, yellow, green and white) for any of your class sizes. Please note, production time is 3-5 business days. Deleting file, please wait… Please upload all the required file (s).