What does a blinking green light mean on a NOCO battery charger?
The blinking green LED is showing the charger is in the Optimization portion of the charge. This can last for up to 48 hours. it happens right after the initial charge is complete, and anytime during Maintenance when the charger is ‘topping’ the battery off.
Why does my battery maintainer keep shutting off?
A battery maintainer is a kind of “smart” charger that will only supply current when your battery’s voltage drops below its ideal level. When the ideal charge is reached, the battery maintainer will shut off and remain that way until the voltage drops again.
What is noco genius repair mode?
Using the 12V repair mode will help to reverse the sulfation/stratification build-up inside of the battery. NOTE: USE THIS MODE WITH CARE. THIS MODE IS FOR 12-VOLT LEAD-ACID BATTERIES ONLY. THIS MODE USES A HIGH CHARGING VOLTAGE AND MAY CAUSE SOME WATER LOSS IN WET (FLOODED) CELL BATTERIES.
Why is my noco genius flashing red and green?
You have activated Force Mode on the device. Force Mode is designed when the charger cannot detect the battery when it is under 2V.
What do the lights mean on a NOCO Genius 5?
The 50% Charge LED will slowly pulse “on” and “off”, when the battery is less than 50% fully charged. When the battery is 50% charged, the red Charge LED will be solid. 75% Orange LED. The 75% Charge LED will slowly pulse “on” and “off”, when the battery is less than 75% fully charged.
How long does repair mode take on a battery charger?
Once the 12V Repair Mode is selected, a Red LED will illuminate and begin flashing. This indicates the 12V Repair Mode is in operation and trying to recover your battery. It can take up to four (4) hours to complete the entire recovery process.
Does noco genius 1 have repair mode?
Press and hold the Mode button for 3 seconds until the 6V LED illuminates, then press the Mode button once more to switch to 12V Repair mode. A red LED will illuminate. The repair mode lasted about four (4) hours, just as the User Guide suggested.
What does a red light mean on noco genius 1?
Red Charge LED When the battery is charging, the CHARGE LED will be illuminated RED. The CHARGE LED will remain a solid RED color (not blinking) until the battery is fully charged.
Why is my noco genius flashing RED and green?
How do you check if a battery charger is working?
Running a test on your battery charger is an easy process.
- Plug in your charger to an electrical outlet.
- Turn on your voltmeter unit.
- Take a battery or battery pack that’s compatible to your battery charger.
- Check the readout on the voltmeter and see where the pointer is indicating to.
How do I get noco genius out of standby mode?
With the charger removed from the battery, press and hold the Mode button down until all of the charge mode LEDs start to flash together (please note if you have a GENIUS10, 12V Supply Mode will light up first, but keep the button pressed until the charge mode LEDs all flash together).