What is SmartConnect in Isilon?

What is SmartConnect in Isilon?

SmartConnect is a module that specifies how the DNS server on the EMC Isilon cluster handles connection requests from clients and the policies used to assign IP addresses to network interfaces, including failover and rebalancing. Settings and policies configured for SmartConnect are applied per IP address pool.

How do I set up Isilon SmartConnect?

Configure a SmartConnect service IP address

  1. Click Cluster Management > Network Configuration > External Network.
  2. Click View/Edit next to the subnet that you want to modify. The system displays the View Subnet Details window.
  3. Click Edit.
  4. In the SmartConnect Service IP field, type the IP address.
  5. Click Save Changes.

How do I find my DNS Isilon?

Procedure

  1. Click Cluster Management > Networking Configuration .
  2. In the DNS Settingsarea, click Edit.
  3. In the Domain name server(s) field, enter up to three domain name server IP addresses.
  4. In the DNS search list field, enter up to six DNS search suffixes.

What is SmartConnect service IP?

The SmartConnect service IP address handles client DNS requests and is configured as a subnet setting. You must have at least one subnet configured with a SmartConnect service IP address in order to handle client DNS requests. Do not designate an IP address from a pool as the SmartConnect service IP.

How do I set up Isilon storage?

Isilon Storage Configuration

  1. Create a directory on EMC Isilon cluster where you want to store the Syncplicity data.
  2. Configure the permissions on the directory via an ssh session to the Isilon Cluster.
  3. Create NFS Export via the WebUI.

What is DNS SSIP?

Note: SmartConnect Service IP Addresses (SSIPs) are only supported for use by a DNS server. Although SSIPs may be used in other configurations, the design intent was for a DNS server. Thus, other implementations with SSIPs are not supported.

What is Groupnet Isilon?

Groupnets can contain one or more subnets, and every subnet is assigned to a single groupnet. Each EMC Isilon cluster contains a default groupnet named groupnet0 that contains an initial subnet named subnet0, an initial IP address pool named pool0, and an initial provisioning rule named rule0.

How do I get to Isilon GUI?

Open a browser window and type the URL for your cluster in the address field, replacing with the first IP address you provided when you configured ext-1 in the one of the following examples: IPv4. https:// :8080.

How do I create a network pool in Isilon?

Each IP address pool is associated with a subnet.

  1. Add an IP address pool. You can add an IP address pool to a external network subnet.
  2. Modify an IP address pool.
  3. Delete an IP address pool.
  4. Modify a SmartConnect zone.
  5. Disable a SmartConnect zone.
  6. Configure IP failover.
  7. Allocate IP addresses to accommodate new nodes.

How do I connect to Isilon?

Connect using a console server

  1. Connect the null modem cable to the node’s management port on the rear of the node.
  2. Connect the other end to the console server.
  3. Refer to the documentation for your console server and configure it using the following serial port settings: Transfer Rate. 115200 bps. Data Bits. Parity. None.

Does SIP use DNS?

When your SIP device does a lookup by domain name, the DNS server provides a public SIP address to the device depending on your protocol preference, prioritized by the DNS entry.

Does VoIP use DNS?

Voice Over IP (VoIP) – VoIP service uses the Internet to make phones. DNS play an important role in running a network, and ensuring that devices such as VoIP phones work as they should. DNS correctly is important in getting the most out of your hosted PABX service.

Is PowerScale and Isilon the same?

Dell EMC PowerScale combines a modified version of the Isilon OneFS software tuned for Dell PowerEdge servers. The systems provide unified access to files and unstructured data.

Is PowerStore the same as Isilon?

Dell has now, following on from the PowerStore launch, completed its Power-branding of its storage products. It has two unstructured data storage products: Isilon for files and ECS for object storage.

What is an Isilon server?

The Isilon scale-out network-attached storage (NAS) platform combines modular hardware with unified software to harness unstructured data. Powered by the distributed Isilon OneFS operating system, an Isilon cluster delivers a scalable pool of storage with a global namespace.

Can I run Isilon on Windows 2012 R2 DC with DNS server?

I just deployed a Windows 2012 R2 DC with running DNS Server on it and also a Isilon One FS 8 Cluster with 3 Nodes. The Isilon is completely configured and i successfully have joined my Isilon into the my domain (labbuildr.local) I already have created a new Host (A Entry) for the SIP in the DNS.

How do I set up a DNS record for SmartConnect?

You need to create 2 DNS records on the DNS server: one as a host record for the SmartConnect service, and the other an NS delegation record for the name of your Isilon cluster (say, myisilon.labbuildr.local). Based on your description, you have already set up the host record for the SmartConnect service: sip.labbuildr.local, 192.168.2.80

How to set up DNS for Isilon cluster?

In nslookup, make sure the DNS server in use is the one that you have the DNS records for Isilon configured. 01-17-2017 11:04 AM You need to create 2 DNS records on the DNS server: one as a host record for the SmartConnect service, and the other an NS delegation record for the name of your Isilon cluster (say, myisilon.labbuildr.local).