What is the blue screw on a Lutron dimmer?
Brass screw: Connect wire (Traveller 2 – note wire color) to this screw. 4. Blue screw: Connect wire (Traveller 1 – note wire color) to this screw. Wiring the Main Dimmer on the load-side.
What is the red wire on a Lutron dimmer switch?
Red is the switched lead (or a traveler in a 3-way installation), and is attached to the switched hot going to the light. Red with white is a traveler, used for 3-way installations. In your situation, you’ll just cap this one off. Green is ground, and is attached to the grounding conductor.
What is the red and white wire on a Lutron dimmer switch?
What are the four wires on a dimmer switch?
The black is the “hot” wire, the white is the neutral, and the copper is the ground. When you put a switch in a circuit you now have 6 wires – three coming in and three going out. Since the switch cuts the power on and off, there will be a black wire coming into the switch and a black wire leaving.
What color wire goes to what color screw?
Basic Wire Color-Coding A black or red-hot wire usually connects to a brass-colored screw terminal or black wire lead on electrical devices. A white neutral wire usually connects to a silver-colored terminal or white wire lead.
What is the red and white wire on a Lutron dimmer?
Where do the red and black wires go on a dimmer switch?
According to the instructions on the dimmer the black wire should be connected to power; the red wire should go out to the light; the striped red wire should just be capped; and the ground should go to the ground.
Can red and white wires go together?
In the US, the answer would be no, even though I am reluctant to answer this. White is not aggressive. White is neutral, black is 120, green is ground, and red is the other phase of the mains into your house.
What controls Lutron Maestro style?
A. Controls Lutron Maestro Style 1. Performance a. Dimmers shall provide full-range, smooth and continuously variable control of light intensity. b. All dimmers shall be designed to minimize effects of changing line frequency.
Where can I find a wiring diagram for a Lutron product?
Search the Lutron archive of wiring diagrams. To find a diagram for a specific product or system, please use the drop-down menus below. For more information, please contact a Customer service representative. You can also call us at +1.888.LUTRON1 (588.7661).
How do I use Lutron’s Maestro occupancy sensor switch?
Let Lutron’s Maestro Occupancy Sensor switch turn the lights or fan on and off for you. It’s a simple, easy, and low cost way to save energy and add automation to your home. Install a Maestro Sensor and lights/fan turn on when you enter the room, and then turn off automatically after you leave/5 ().
What type of wiring is used for the Maestro smart dimmer?
Uses standard single-pole and 3-way wiring for easy Products above: For multi -location dimming, use one Maestro Smart Dimmer with up . Wiring Diagram 2. dard switches as in the Two-Location diagram above. The 4-way standard switch will have insulated wires connected to four screws plus a green ground screw.