What is the difference between a staysail and a jib?
On a boat with two staysails the inner sail is called the staysail, and the outer (foremost) is called the jib. This combination of two staysails is called a cutter rig (or in North America a yankee pair) and a boat with one mast rigged with two staysails and a mainsail is called a cutter.
How much does a new jib cost?
How much do sails cost? Replacing the jib and main sail on a 24′ Bermuda sloop will typically cost between $1,000-$2,500. Sails on mid-sized boats (34′) will generally cost between $3,000-$5,000. Prices can greatly vary depending on boat length, sail material, quality of fabric, and so on.
Is a staysail a headsail?
Triangular staysails set forward of the foremost mast are called jibs, headsails, or foresails. The innermost such sail on a cutter, schooner, and many other rigs having two or more foresails is referred to simply as the staysail, while the others are referred to as jibs, flying jibs, etc.
How much does a used sail cost?
Price of used sailboats
| Length Range | Low | Average |
|---|---|---|
| 20-24ft | $6,000 | $19,000 |
| 25-29ft | $7,000 | $30,000 |
| 30-34ft | $9,000 | $66,000 |
| 35-39ft | $14,000 | $111,000 |
Which is better jib or genoa?
The Jib is perfect for rough weather and is easier to use, stow, and attach. The Genoa is heavier, better for light wind conditions, and optimized for downwind performance!
How often should sails be replaced?
How long should you expect your cruising sail to last? Charter fleets expect 2 – 3 years of use from basic woven polyester sails, which translates to about 1500 – 2500 hours. After 2,000 hours, these sails are typically considered worn out.
When can I fly with staysail?
In short, the optimum conditions for the staysail (when adding horsepower), are at apparent wind angles of 50-130 with a minimum apparent wind velocity of 10-12 knots. Trim of the staysail is really no different than any other headsail. When reaching, keep in mind the first rule of sail trim: when in doubt, let it out.
What is a code 2 sail?
Code 2 is a medium air running sail, used for apparent wind angles over 90 degrees. Code 3 is a medium air reaching sail, used for apparent wind angles near 90 degrees. Code 4 is a heavy air running sail, used in the heaviest winds normally expected.
How do I know if I need new sails?
With the main, the telltale sign is a diagonal wrinkle across the sail when it’s up and filled that won’t go away. With the headsail it’s a belly that won’t go away. When the jib sheets are hauled in tight the sail should flatten out in a simple curve.
What is a mizzen staysail?
Mizzen headsails are attached at three points and provide lots of power when sailing off the wind. The head is attached to the mizzen, the tack is attached to the aft bast of the main mast, and the clew is sheeted through the end of the mizzen boom. The sail is set flying, with no stay supporting its luff.