Why does my Whirlpool washer not spin?
If your washer fills properly but neither spins nor rinses, the most likely problem is with the drive belt, accessed via the back panel of the washer. If the belt is broken or has slipped off, the motor to activate spinning, rinsing and agitating will not function properly.
How do I tell how old my Whirlpool washer is?
An alpha code in the model number indicates the year the model was introduced. Before 1981, the second digit of the model number contained the code. After 1981, the eight digit contains the code.
Why is my washer draining but not spinning?
Normally, your washing machine won’t go into a spin cycle until it’s been drained. The drainage hose may become clogged with debris from your clothing, or it could be kinked. If the hose is kinked or crushed, it will likely need to be replaced.
How long should a Whirlpool washer last?
A washer can last between 12 and 14 years, while a dryer lasts between 18 and 24 years. The washer and dryer should last a long time. The length of time you can keep this appliance depends on how often you use it and how many loads you have.
How do I reset my Whirlpool washer?
Follow these steps to reset your Whirlpool washer:
- Turn the washing machine off using the control panel.
- Unplug the washing machine.
- Wait three minutes.
- Plug the washer back in, and wait thirty seconds before turning the washer on.
How do I fix a washer that won’t spin?
How To Fix A Washer That Won’t Spin
- Lighten the load inside the washer.
- Rebalance the load in the washing machine.
- Check or repair the washing machine drain hose.
- Check for blown fuses.
- Check the washing machine lid safety switch.
- Replace the drive belt in your washing machine.
- Replace the motor in your washing machine.
What causes a washer not to agitate or spin?
If your washer fills with water but doesn’t agitate, the problem is likely to be a faulty lid switch, a broken belt, or a problem with the motor. (Note: Direct-drive washing machines do not have belts.)