How much space should be on the sides of a refrigerator?
Side Clearance – Plan for between one-half inch to one-inch of clearance on both sides of the unit. Rear Clearance – Allow between one to two inches of space at the rear of the refrigerator for proper airflow. Top Clearance – Ensure there is a minimum of one-half inch to one-inch of clearance on top of the unit.
Does fridge need clearance on sides?
Space Between Refrigerator and Side Wall You should allow for a ½ inch to 1 inch of extra space between the refrigerator and side walls. Allow the same amount of clearance at the top. The refrigerator distance from the back wall should be a bit more, about 1 to 2 inches.
How far should a Samsung refrigerator be from the wall?
2 inches
All Samsung refrigerators require a minimum clearance of 2 inches (or 5 cm) behind the unit.
How much air space should be around a refrigerator?
Leave space around the refrigerator to vent. Make sure that your refrigerator can breathe. Without proper ventilation, you can damage the fridge and cause it to consume more energy. You’ll need at least a quarter-inch gap for ventilation on the sides of the refrigerator as well as one inch on the back and top.
Why do you need a gap around a fridge?
Remember to leave 25 mm of free space around the top, back and sides to allow for the heat produced during refrigeration to escape. Be sure to also measure clearance (entryways, doorways etc.) to ensure that when your fridge is delivered it will fit safely into the home, and your old fridge can be safely removed.
How much free space should I allow around my refrigerator?
How much free space should I allow for, around my Refrigerator? For your free-standing ‘side-by-side’ refrigerator, you should leave a minimum distance of 50 mm of space free around the sides and at the back of the unit, and then at least 25 mm space at the top.
How much space do you need between fridge and wall?
two inches
Rear — This is where the most clearance is needed. The refrigerator should be at least two inches from the wall. Top — If you have back coils, you will need at least two inches of top clearance to dissipate heat, but for bottom coils, as little as one inch can be sufficient.
Why do fridges need space around them?
Fridges need some breathing space around them to let heat dissipate. If you don’t allow enough space, the fridge will have to work harder to stay cool, which could shorten its lifespan and will definitely cost you more in electricity bills.
How much clearance does a refrigerator need to open?
Standard-depth refrigerators typically measure 30 to 35 inches in depth, as opposed to counter-depth refrigerators that sit flush with cabinetry. 3 Allow 3.75″ of clearance when installing along a wall. This will allow for the door to open 90 degrees without the handle contacting the wall.
How far should a refrigerator stick out past the cabinets?
Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.
How much space is needed for a 36 refrigerator?
As a rule of thumb, 4 to 6 cu. ft. of fridge space per person is sufficient.
How do you fill the gap around a refrigerator?
If you’re looking for an easy way to fill the gaps between your fridge and cabinet, you might want to consider using filler strips. Filler strips are thin pieces of wood or plastic that can be cut to fit the space between your fridge and cabinet. They’re relatively inexpensive and can be found at most hardware stores.
Will 36 fridge fit in a 36 opening?
Yes, it should. Mine measures 35.75″ wide.
What is the standard rough opening for a refrigerator?
The refrigerator opening must have minimum dimensions of 70″ high x 36-1/8″ wide x 24-1/2″ deep as shown at right. If there is an overhead cabinet, allow 1″ for cabinet door clearance with the top trim piece so the cabinet doors can be opened without hitting the top trim.
How much space should be between cabinets and refrigerators?
You should keep about half-inch to one-inch space for the side clearance. Also, it would be better to allow one to two inches of space for the rear of the refrigerator. Lastly, you can give in at least half-inch to one-inch space for the top clearance.
How is refrigerator space measured?
Measure the Space Your Refrigerator Occupies
- Measure the Width. Measure the width under the upper cabinets, between countertops and at the base between the walls, cabinets or baseboard trim.
- Measure the Height.
- Measure the Depth.
- Account for Room to Breathe.
- Door and Drawer Considerations.