What does 3/4 inch overlay hinge mean?
If your cabinets are designed for full overlay, it means that the doors completely overlap the opening on all four sides. The correct determination for full overlay is typically 3/4 inch on all sides.
How do I know which Blum hinge?
You will find the Blum logo embossed on the housing of clip-on BLUMOTION.
How thick can doors be with Blum hinges?
The 110° hinge allows you to implement thicker doors of up to 24 mm – depending on application.
What size hinges for 35mm door?
75mm x 50mm
For standard 35mm thick internal doors, a suitable hinge would be 75mm x 50mm (3″ x 2″).
What is Blumotion Blum?
Soft and effortless closing. Thanks to soft-close BLUMOTION, furniture closes softly and effortlessly no matter how hard you slam fronts, doors or pull-outs or how heavy they are. The soft-close feature is integrated into lift systems, hinges and pull-out systems.
How do you measure a door overlay?
Line up the edge of your door with the edge of a piece of tape and apply the tape to the face frame of the cabinet (must be on the hinged side of the door). Now, open the cabinet door and measure from the edge of the tape (inside edge) to the edge of the opening of the cabinet. In this case the overlay is 1-1/4″.
Is Blumotion soft close?
Thanks to soft-close BLUMOTION, furniture closes softly and effortlessly no matter how hard you slam fronts, doors or pull-outs or how heavy they are. The soft-close feature is integrated into lift systems, hinges and pull-out systems.
Are Blum hinges soft close?
Thanks to soft-close BLUMOTION, doors close softly and effortlessly no matter how hard you slam them or how heavy they are. The soft-close feature is integrated into our lift systems, hinges, and drawer systems.
How are full overlay hinges measured?
Overlay refers to how much the door overlaps on the hinge side. You can determine this by measuring the width of the door, subtract the width of the opening and divide that in half. For example, if the door is 1” wider than the opening, that means it overlays 1/2″ on each side, so you would select 1/2″ overlay hinges.
What is the most common overlay for cabinet doors?
Most common are half and three-quarter overlays which, as you might expect, conceal half and three-fourths respectively of the cabinet frame. On wider frameless cabinets with four doors across (typically 42″ or more) a center panel is present where the two center doors are mounted.