Can a Hypertech speedometer calibrator be used on multiple vehicles?
The Speedometer Calibrator can only be used on one (1) vehicle at a time, so if you sell your vehicle or want to use it on a friend’s vehicle, simply return your vehicle to the stock program and you may then use the programmer on another vehicle that is covered in the same part number.
Do you have to disconnect fuses to use a speedometer calibrator?
If it’s hot, roll the window(s) down BEFORE programming the vehicle. Vehicles equipped with OnStar, satellite radio, remote starter, and/or aftermarket speakers/amplifiers MUST have the fuse/fuses removed in order to disable those devices PRIOR to and during the programming process.
How do I update my Hypertech speedometer calibrator?
For some vehicles, speedometer calibration is offered but no engine tuning is available. Your vehicle has to be programmed back to stock setting. After you buy the upgrade, go to www.Hypertech.com and select Support, then software downloads. Once downloaded, install software and follow instructions and update unit.
Can you reset a Hypertech programmer?
You can send it back to Hypertech and for a little over $200 they will reset it for you, but you (or the new owner of your car) will not be able to return to the stock settings. I would let it go with the car so the new owner does not have to deal with it.
How do you calibrate a speedometer after changing gear ratio?
Press and hold the calibration button located on the speedometer, start the vehicle, and then release the button. Press that button again and then take the test drive. Once you have driven the distance needed, press the button once more and the speedometer will calibrate itself to accommodate the new tire size.
How far off will my speedometer with bigger tires?
You might ask: do bigger tires make your speedometer faster? The answer is no. Tire size and speedometer accuracy are directly linked to each other. Up-sizing, or installing a taller tire, will lead to a speedometer reading that is slower than your actual speed.
How much horsepower does a Hypertech programmer add?
The Hypertech Max Energy Programmer unlocks every ounce of power in your ride, increasing the horsepower of fuel-powered rides by up to 57 hp and diesel rigs by up to 176 hp.
How do I unlock Hypertech Power Programmer 3?
How to Unlock Hypertech Power Programmer
- Plug your Hypertech programmer into the OBD2 on your car.
- Turn the key to the “on” position but do not start your car.
- Select “Return the Programming to Stock” to restore your car to the factory settings.
How do you recalibrate a speedometer for larger tires?