How do I change my Bushnell rangefinder to yards?
To select between yards and meters (starting with unit powered off), press and hold the POWER/FIRE button. After 7 seconds, the display will begin to cycle through the options: Yards or Meters. When the units you want to use are displayed, release the POWER/FIRE button to select it.
How do you change the Slope on a Bushnell?
7. Slide Slope Switch to left (red indicator visible) to enable slope compensated ranging, slide it to the right (red indicator hidden) to disable slope. 8. With slope mode enabled, tap Mode button to toggle Elements on/off, indicated by the Elements mode icon in the display.
How do you read a golf scope?
Unobstructed View Hold the golf scope up to your eye. Line up the bottom of the flagstick with the horizontal line marked “Green” in your viewfinder. Read the numbers that are lined up with the top of the flagstick. That is your yardage.
How do I change my rangefinder from meters to yards?
The rangefinder can be used to measure distances in yards or meters. The unit of measure indicators are located in the lower right portion of the LCD. To select between yards and meters, the unit should be off. While looking through the eyepiece, press and hold the POWER button down for approximately 5 seconds.
How do I change my Bushnell Pro XE from meters to yards?
Turning Slope mode on and off is as easy as sliding the Slope Switch left or right. You can turn on Elements Mode with a single touch of the Mode button. Holding Mode brings up the menu for adjusting brightness and toggling between yards and meters. Overall, the Bushnell Pro XE is intuitive and easy to use.
How do you turn off Slope?
Golfers can simply move the switch to its top position to activate the slope function or slide the switch to the bottom position to disable it.
How do you turn off slope?
What is slope adjustment?
Slope refers to the ability of a laser rangefinder to compensate for changes in gradient and adjust the distance to the flag or object accordingly. When you are hitting uphill, the shot is actually playing longer and a Slope distance will reflect this. Conversely, a shot hit downhill will travel further.
How do you focus a Bushnell rangefinder?
Turn the eyepiece, counter clockwise, until the reticle appears slightly blurred. 5. Turn the eyepiece, clockwise, until the reticle comes into focus.
How do I change my Bushnell rangefinder to FEEt?
To select a different unit of measure, start with the rangefinder powered off. Press and continue to hold the Fire button. “Y”, “M” or “FEEt” will begin flashing, with the display slowly cycling through these 3 unit options (5,7b). Release the Fire button when your desired display units are flashing.
How do you use a manual Golf Scope?
Stand behind the golf ball and use the golf scope to locate the flag stick on the green. 2. Align the “GREEN” line to the lowest visible stripe of the flag stick by tilting the scope. Make sure to hold the scope so that the flag stick is perpendicular to the “GREEN” line.
How do I change my Bushnell from meters?
To select between yards and meters, look through the monocular, depress the “mode” button (left side of the unit underneath the BUSHNELL YARDAGE PRO logo) and hold it down for approximately 2 seconds.