What is the best hearth for a wood burner?
The most common and best hearth material for a wood burning stove is stone, especially slate and granite. However, you will also find hearths made from glass and steel. These can withstand high temperatures without cracking or posing a fire hazard.
How close can a wood stove be to a rock wall?
Wood frame walls covered with dry wall are considered combustible. If no wall protection is used, the common radiant-type stove or heater must be spaced out at least 36 inches from the wall.
Do I need a hearth with a wood burning stove?
Hearth regulations: general A hearth is designed to protect a building and occupants from the solid fuel appliance. Basically we do not wish to set the floor surface on fire, either by heat from the wood burning stove or from fuel falling out when you open a door.
How big should a hearth be for a wood burning stove?
Generally, the minimum hearth size for a wood burning stove is 150mm on either side of the stove and at least 840mm by 840mm for freestanding stoves. Your hearth will also need to be deep enough to prevent accidents. The minimum hearth depth for a wood burner is 300mm.
Can you build a hearth around a wood stove?
Hearth Size and Clearances Under National Fire Protection Association Code 211, a raised hearth must extend at least 18 inches on all sides around the stove to give adequate floor protection. Check with your local fire and building jurisdictions before you design and build your hearth and buy your wood stove.
What do you put under a wood burning stove?
Wood stoves need a heat-resistant pad underneath to protect the house from excessive heat and flames. The pad should extend at least 18 inches past all sides of the stove, but check your model to learn whether it requires a larger pad.
What clearance is required around a wood burning stove?
The standard clearance recommended by the National Fire Protection Agency is 36 inches. This means that the back of the stove should be 36 inches away from any combustible material, such as woodwork, unprotected walls, furniture and even firewood.
How high does a wood stove have to be off the floor?
It stipulated that the “appliance” must be mounted 18 inches above floor level. To be sure, the height of the appliance’s pedestal or legs was being factored in as part of the appliance.
What stone can be used for a hearth?
Granite
Granite is one of the most commonly used stones for hearths due to its durability and high heat resistance. It can easily withstand temperatures of up to 480 °F, likely even up to 1200 °F. Granite’s hardness also means that it is scratch-resistant, which is great for homes with children and pets.
How high should a wood stove be off the floor?
For listed stoves it should extend at least 8″ on the sides and back and 18″ in the front. The basic floor protection specified by NFPA applies to stoves with legs over 6″ in height. This means that the floor of the stove combustion chamber should be at least this height above the floor surface.
Can you use stone veneer behind wood stove?
A common way to help protect the wall behind a wood stove and create a backdrop for your stove includes using masonry veneer faux panels. Stone or brick is a common material to use behind a wood burning stove. These panels help create more of a focal point for a room.
What should I put on the wall behind my wood stove?
Common fireproof wall ideas for behind a stove include stone, brick and tiles. The look of a wood burning stove can be enhanced by using a faux panel (such as a stone veneer look) or using a fireback.
What stone is best for fireplace hearth?
What stone should I use for fireplace hearth?
Granite is the most popular choice for a stone fireplace surround. It is one of the most durable and long-lasting types of stone you can buy. Granite is extremely durable with its scratch-resistant surface. Granite is also very unlikely to crack or chip, and it has a good level of heat tolerance.
What stone is good for fireplace hearth?