Where are Viking pumps manufactured?
Our Facilities. Viking Pump has four wholly-owned facilities in Cedar Falls, Iowa that are located in close proximity to each other.
What does Viking pump do?
Viking Pump, Inc. has been a pump industry leader and innovator since its founding in 1911. We’re building on our ever-growing experience to deliver innovative pumping solutions (including custom designs) to thousands of customers who use millions of Viking pumps in some of the world’s toughest applications.
What type of pump is a Viking Pump?
The Internal Gear Pump was invented by Viking Pump’s founder Jens Nielsen, in 1904.
What is internal gear pump?
An internal gear pump moves a fluid by repeatedly enclosing a fixed volume within interlocking gears, transferring it mechanically to deliver a smooth pulse-free flow proportional to the rotational speed of its gears.
Who invented the internal gear pump?
Jens Nielsen
The internal gear pumping principle was invented by Jens Nielsen, one of the founders of Viking Pump. It uses two rotating gears which un-mesh at the suction side of the pump to create a vacuum that pulls fluid into the pump.
How much is a Viking pump?
Filter
| Description | Price | U/M |
|---|---|---|
| Viking Pump Viking Pump Model AL4195 Cast Iron Gear Pump 4-1920-2231-559 4-1920-2231-559 MFG #: 4-1920-2231-559 | Carotek Price $3,301.74 | EA |
| Viking Pump Viking Pump Model AL4197 Stainless Steel Gear Pump 4-1920-2243-502 4-1920-2243-502 MFG #: 4-1920-2243-502 | Carotek Price $13,832.52 | EA |
Are gear pumps self priming?
Gear pumps are self-priming and can dry-lift although their priming characteristics improve if the gears are wetted. The gears need to be lubricated by the pumped fluid and should not be run dry for prolonged periods.
What are the two types of gear pump?
There are two basic types: external and internal. An external gear pump consists of two identical, interlocking gears supported by separate shafts. An internal gear pump has two interlocking gears of different sizes with one rotating inside the other.
What causes of internal leakage in internal gear pump?
(b) Internal structure of pump. Hydraulic oil is transported from inlet to outlet as the driving gear rotates. The leakage is caused by the clearance h1 and h2 when the gear pumps are operational, as shown in Figure 2.
Can gear pumps run dry?
What is gerotor pump?
Gerotor pumps are internal gear pumps without the crescent. The rotor is the internal (drive) gear shown below in gray, and the idler is the external (driven) gear, shown below in orange.
What is a hydraulic gear pump?
Hydraulic gear pumps convert mechanical power into the hydraulic energy of the fluid. The rotation of the gear causes the suction at the inlet and fluid is transferred by the pump. The fluid flows over the gears. The mechanical energy by the rotation of gears is transferred into the fluid pressure at the discharge.
Which type of pump is most efficient?
Efficiency & Performance In general, a reciprocating pump is more efficient than a centrifugal pump. Reciprocating machines are generally applied on low-flow/high-head service. Centrifugal pumps can have efficiencies as low as 40 percent on low-flow/high-head service.
What is RAM type pump?
DIY hydraulic ram pump. The Hydraulic Ram Pump, Hydram, or simply Ram Pump is an automatic pumping device that is capable of pumping water higher than its original source without using electricity or any other power source. It uses just two moving parts, and it is therefore mechanically very simple.
What is the disadvantage of gear pump?
Disadvantages Of Gear Pump: 1) As meshing gears are used, abrasive fluids cannot be used in the gear pump. 2) These pumps are very noisy. 3) The size of gear pumps is limited so it can not be used for large bulk flow rates.
Where to buy Viking pumps in Cape Town?
L & B Industrial Power Cape Town are direct importers and an authorized service center for Viking Pumps. With over 100 years of expertise, each Viking pump is uniquely designed for the task at hand, from simple solutions to your most advanced and demanding needs.
Are You a direct importer for Viking pumps?
Not only are we direct importers for Viking Pumps, but also an Authorized Service Center. Viking pumps are used in virtually every industry today, from chemicals, fuels, and plastics, to materials that are thin, thick, hot, cold, liquid, solid and much more.
What are Viking pumps used for?
Viking pumps are used in virtually every industry today, from chemicals, fuels, and plastics, to materials that are thin, thick, hot, cold, liquid, solid and much more. L & B Industrial Power are direct importers and an authorized service center for Viking Pumps.